0 comments / Posted on by Linda VXDAS

How to Modify Laptop Sata Hard Disk Mode for Benz Xentry and ODIS HDD/SSD Software ?

Some customers buy MB Star Diagnostic Xentry software or ODIS software HDD may have this problems: when put our HDD/SSD software to the laptop, the laptop can't be turn on, always restart, and it appears blue screen. But changed to other HDD/SSD, it's OK. For this problem, the solution is Modify Sata Hard Disk Mode

The following is about How to Modify Laptop Sata Hard Disk Mode

Differant brand laptop press different Button.

Differant brand laptop press different Button.

Note:

  1. Recommended computer configuration: i5 CPU, 4G Ram, do not use the external hard drive to connect the USB cable
  2. ODIS HDD boot setting hard disk mode
  3. When you turn on the computer, the screen is blue.

Solution: Modify the hard disk mode

Step 1 Start your laptop first

Start your laptop first--vxdas

Start your laptop first--VXDAS

Step 2  When the laptop started, press F12 untill the following interface appears (some laptop press ESC, F9 , please chech from the above laptop brand form)

press F12 untill the following interface appears -VXDAS

 Step 3 Select BIOS-Setup, the click "Enter" on your keyboard

Select BIOS-Setup-VXDAS

 

Step 4 Use the up and down keys to move options. click Onboard Devices, then Select "SATA Operation"

Select "SATA Operation"-vxdas

Step 5 Switch left or right to select ATA or AHCI mode, here is choose AHCI mode

Switch left or right to select ATA or AHCI mode-VXDAS

Step 6: Click "Yes" and "Apply" , in finial , click "End", the laptop would be restart.

How to Modify Laptop Sata Hard Disk Mode

Save & Exit Setup

Done !

How to change the disk mode to AHCI Video Instruction

 

After Sales Service

If there are any technical issues, first you can connect to the network and run Teamviewer.

www.vxdas.com

Email: sales002@vxdas.com

whatsapp: +86 18566703079  

How to Modify Laptop Sata Hard Disk Mode for Benz Xentry and ODIS HDD/SSD Software ?

Some customers buy MB Star Diagnostic Xentry software or ODIS software HDD may have this problems: when put our HDD/SSD software to the laptop, the laptop can't be turn on, always restart, and it appears blue screen. But changed to other HDD/SSD, it's OK. For this problem, the solution is Modify Sata Hard Disk Mode

The following is about How to Modify Laptop Sata Hard Disk Mode

Differant brand laptop press different Button.

Differant brand laptop press different Button.

Note:

  1. Recommended computer configuration: i5 CPU, 4G Ram, do not use the external hard drive to connect the USB cable
  2. ODIS HDD boot setting hard disk mode
  3. When you turn on the computer, the screen is blue.

Solution: Modify the hard disk mode

Step 1 Start your laptop first

Start your laptop first--vxdas

Start your laptop first--VXDAS

Step 2  When the laptop started, press F12 untill the following interface appears (some laptop press ESC, F9 , please chech from the above laptop brand form)

press F12 untill the following interface appears -VXDAS

 Step 3 Select BIOS-Setup, the click "Enter" on your keyboard

Select BIOS-Setup-VXDAS

 

Step 4 Use the up and down keys to move options. click Onboard Devices, then Select "SATA Operation"

Select "SATA Operation"-vxdas

Step 5 Switch left or right to select ATA or AHCI mode, here is choose AHCI mode

Switch left or right to select ATA or AHCI mode-VXDAS

Step 6: Click "Yes" and "Apply" , in finial , click "End", the laptop would be restart.

How to Modify Laptop Sata Hard Disk Mode

Save & Exit Setup

Done !

How to change the disk mode to AHCI Video Instruction

 

After Sales Service

If there are any technical issues, first you can connect to the network and run Teamviewer.

www.vxdas.com

Email: sales002@vxdas.com

whatsapp: +86 18566703079  

0 comments

Leave a comment

All blog comments are checked prior to publishing