0% Off
AT AVRISP MKII Programmer and Downloader
AT AVRISP MKII Programmer and Downloader
AP133
0.3kg
Car Diagnostic Tool
AT AVRISP MK II donwloader is used for field upgrades of 8-bit AVR microcontrollers with ISP or PDI interfaces.The At AVRISP MKII combined with AT Studio can program all AT 8-bit RISC microcontrollers with ISP, PDI, or Interface.
Description for AT AVRISP MKII
AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL
A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA
Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be
updated to support other AVR Studio versions)
Features of AT AVRISP
- Support the latest version of software: ATMEL STUDIO 7; and older versions of STUDIO 6, 5, 4, etc.
- Support firmware automatic upgrade;
- All firmware has been tested and upgraded to the latest firmware before shipment.
- Support Atmel Studio 4, 5, 6, 7, if the official upgrade of Atmel Studio, can also be perfect support;
- Support ISP PDI TPI three programming download methods;
-
Support all AVR chips with ISP interface.
- Support all ATxmega chips with PDI interface.
- Support all AVR chips with TPI interface;
- Pure USB 2.0 interface, speed up to 12 Mbps;
- The security performance is very good, with Target interface protection and short circuit protection.
Compatible with AT AVRISP mkII, which is the official original ATMEL. Full refund will be made if there are differences in function and usage between the original ATMEL and AT AVRISP mkII.
Direct use of official software Atmel Studio
- In the official software Atmel Studio, it is identified as the original AVRISP mkII;
- Automatically upgrade firmware to match different versions of software, so that downloaders can support the latest software and chip models at any time.
- There is no need to install additional drivers, as long as the Atmel Studio software is installed, the downloader computer can automatically identify;
- Provide exclusive dual connectors: 10PIN and 6PIN. Not easy to lose, and no additional cost;
- The Downloader is powered by USB, but not by the target board. Target board should be powered separately.
- The downloader needs to detect the power supply of the target board and intelligently detect the voltage range of the target board.
Computer Operator Systems supported are: XP, WIN7, WIN8, WIN10;
The supported target voltage is: 1.6V~5.5V.
AT AVRISP mkII downloader support chip types:
All the chip downloaders supported by the official software Atmel Studio can be supported. And with the upgrade of Atmel Studio software, downloaders can also support more kinds of chips. If not clear, you can consult at any time.
Package list:
USB AVRISP MKII*1
USB Printer Cable*1
10-pin Cable (spare)*1
10 Pin to Standard 6 Pin Adapter Convert Board*1
10-wire multicolour custom connector cable*1
User Guide CD*1
USB Printer Cable*1
10-pin Cable (spare)*1
10 Pin to Standard 6 Pin Adapter Convert Board*1
10-wire multicolour custom connector cable*1
User Guide CD*1
AT AVRISP MK II donwloader is used for field upgrades of 8-bit AVR microcontrollers with ISP or PDI interfaces.The At AVRISP MKII combined with AT Studio can program all AT 8-bit RISC microcontrollers with ISP, PDI, or Interface.
Description for AT AVRISP MKII
AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL
A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA
Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be
updated to support other AVR Studio versions)
Features of AT AVRISP
- Support the latest version of software: ATMEL STUDIO 7; and older versions of STUDIO 6, 5, 4, etc.
- Support firmware automatic upgrade;
- All firmware has been tested and upgraded to the latest firmware before shipment.
- Support Atmel Studio 4, 5, 6, 7, if the official upgrade of Atmel Studio, can also be perfect support;
- Support ISP PDI TPI three programming download methods;
-
Support all AVR chips with ISP interface.
- Support all ATxmega chips with PDI interface.
- Support all AVR chips with TPI interface;
- Pure USB 2.0 interface, speed up to 12 Mbps;
- The security performance is very good, with Target interface protection and short circuit protection.
Compatible with AT AVRISP mkII, which is the official original ATMEL. Full refund will be made if there are differences in function and usage between the original ATMEL and AT AVRISP mkII.
Direct use of official software Atmel Studio
- In the official software Atmel Studio, it is identified as the original AVRISP mkII;
- Automatically upgrade firmware to match different versions of software, so that downloaders can support the latest software and chip models at any time.
- There is no need to install additional drivers, as long as the Atmel Studio software is installed, the downloader computer can automatically identify;
- Provide exclusive dual connectors: 10PIN and 6PIN. Not easy to lose, and no additional cost;
- The Downloader is powered by USB, but not by the target board. Target board should be powered separately.
- The downloader needs to detect the power supply of the target board and intelligently detect the voltage range of the target board.
Computer Operator Systems supported are: XP, WIN7, WIN8, WIN10;
The supported target voltage is: 1.6V~5.5V.
AT AVRISP mkII downloader support chip types:
All the chip downloaders supported by the official software Atmel Studio can be supported. And with the upgrade of Atmel Studio software, downloaders can also support more kinds of chips. If not clear, you can consult at any time.
Package list:
USB AVRISP MKII*1
USB Printer Cable*1
10-pin Cable (spare)*1
10 Pin to Standard 6 Pin Adapter Convert Board*1
10-wire multicolour custom connector cable*1
User Guide CD*1
USB Printer Cable*1
10-pin Cable (spare)*1
10 Pin to Standard 6 Pin Adapter Convert Board*1
10-wire multicolour custom connector cable*1
User Guide CD*1
