OBDSTAR ECU FLASH Cable for X300 DP Plus X300 Pro4 OBDSTAR ECU FLASH Cable for X300 DP Plus X300 Pro4

AS023
0.2kg
Auto Key Programmer
$59.00 $45.00 24%
Buy it now
OBDSTAR ECU FLASH Cable for X300 DP Plus X300 Pro4
$59.00 $45.00 24%
-
+
Buy it now

OBDSTAR ECU FLASH Cable, used with X300 DP Plus, X300 PRO4.

OBDSTAR ECU FLASH Cable for X300 DP Plus and X300 Pro4

Support ECU:

BOSCH EDC17C55, EDC17C63, MED17.5, MED17.5.1, MED17.5.2, MED17.5.5, MED17.5.5, MED17.5.21, MED17.5.25, EDC17CV44, EDC17CV54, EDC17C54, EDC17C64, MED17.1.6, ME17.1.6, EDC17C81, EDC17C53, EDC17C46, ME17.5.6, MED17.5.20, EDC17U01, MED17.4.4, EDC17CP44, ME17.1.1, MED17.1.1, ME17.5.20, EDC17CV45, EDC17CV41, EDC17C04, EDC17CP52 etc.

 

Equipment Overview

OBDSTAR ECU FLASH Cable for X300 DP Plus

1. Diag cable OBD connector(male)
2. P002 adapter
3. Connect P002 connector (female)
4. Connect vehicle OBD diag connector (male)
5. Lock plug
6. Relay plug
7. Battery clip (positive pole)
8. Jumper plug (relay)
9. Jumper plug (fuse blue)
10. Jumper plug (fuse brown)
11. Connect P002 connector TOYOTA-1 female (BENCH)
12. Connect ECU connector TOYOTA-1 female (BENCH)
13. TOYOTA-1 cable 12V power supply (BENCH)

 

BOOT Mode Connecting Methods

Step 1: Connect 1, 2, 3 together as pic below:

BOOT Mode Connecting Methods

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step 3: connect 12V power with diagnostic device;
Step 4: read data on diagnostic device

 

Step 1: Connect 1, 2, 3 together as pic below:

BOOT Mode Connecting Methods

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step 3: connect 7 with 4 or 5 and connect it to ECU;
Step 4: connect 12V power with diagnostic device; Step5: read data on diagnostic device


If you need full package, please check OBDSTAR P002 Adapter Full Package.

 

Package List:

1pc x ECU Flash Adapter

OBDSTAR ECU FLASH Cable, used with X300 DP Plus, X300 PRO4.

OBDSTAR ECU FLASH Cable for X300 DP Plus and X300 Pro4

Support ECU:

BOSCH EDC17C55, EDC17C63, MED17.5, MED17.5.1, MED17.5.2, MED17.5.5, MED17.5.5, MED17.5.21, MED17.5.25, EDC17CV44, EDC17CV54, EDC17C54, EDC17C64, MED17.1.6, ME17.1.6, EDC17C81, EDC17C53, EDC17C46, ME17.5.6, MED17.5.20, EDC17U01, MED17.4.4, EDC17CP44, ME17.1.1, MED17.1.1, ME17.5.20, EDC17CV45, EDC17CV41, EDC17C04, EDC17CP52 etc.

 

Equipment Overview

OBDSTAR ECU FLASH Cable for X300 DP Plus

1. Diag cable OBD connector(male)
2. P002 adapter
3. Connect P002 connector (female)
4. Connect vehicle OBD diag connector (male)
5. Lock plug
6. Relay plug
7. Battery clip (positive pole)
8. Jumper plug (relay)
9. Jumper plug (fuse blue)
10. Jumper plug (fuse brown)
11. Connect P002 connector TOYOTA-1 female (BENCH)
12. Connect ECU connector TOYOTA-1 female (BENCH)
13. TOYOTA-1 cable 12V power supply (BENCH)

 

BOOT Mode Connecting Methods

Step 1: Connect 1, 2, 3 together as pic below:

BOOT Mode Connecting Methods

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step 3: connect 12V power with diagnostic device;
Step 4: read data on diagnostic device

 

Step 1: Connect 1, 2, 3 together as pic below:

BOOT Mode Connecting Methods

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;
Step 3: connect 7 with 4 or 5 and connect it to ECU;
Step 4: connect 12V power with diagnostic device; Step5: read data on diagnostic device


If you need full package, please check OBDSTAR P002 Adapter Full Package.

 

Package List:

1pc x ECU Flash Adapter

Recently Viewed Products Recently Viewed Products