VXDAS Universal Harness Kit Splitter Extension 16Pin OBD T Cable Car/Auto Plastic Flange Mount Brackets/Connector/Adapter Set VXDAS Universal Harness Kit Splitter Extension 16Pin OBD T Cable Car/Auto Plastic Flange Mount Brackets/Connector/Adapter Set

0.32kg
OBD2 Cable and Connectors
$79.90 $69.90 13%
-
+

The OBD T CABLE is an OBDII T-harness kit with fifteen mounting brackets for connecting a Geolocation system to most light-duty and medium -duty vehicles internationally.

The OBD T CABLE contains the mounting adapters listed below.

North American Flange Mount                       European Latch &Snap

North American Extended Flange Mount      VW Snap-In

North American Snap-In Mount                     BMW Slide & Lock

North American Slide & Lock Mount             Ford Round Snap-In

European Lock Mount                                     Iveco Slide & Lock

Asian Snap-In                                                  Volvo Slide Mount

 

1. Volvo Slide Mount coding is 201-FB000059 for Volvo,1 package list

2.North American Snap-In Mount coding is 201-FB000060 for Chrysler, 1 package list 

3.BMW coding is 201-FB000061 for BMW,1 package list

4.European Lock Mount coding is 201-FB000062 for Mercedes,BMW, 1 package list 

5.European Latch& Snap coding is 201-FB000063 for Fiat, Citröen, Peugeot, 1 package list 

6.BMW Slide & Lock coding is 201-FB000064 for BMW,1 package list 

7.Honda coding coding is 201-FB000065 for Honda,1 package list 

8.Ford Round Snap-In coding is 201-FB000066 for Ford,1 package list 

9.Citröen,Renault S.A coding is 201-FB000067 for Citröen,Renault S.A,  1 package list  

10.North American Slide & Lock Mount coding is 201-FB000068 for Ford, GM,  1 package list 

11.North American Flange Mount coding is 201-FB000069 for Ford, GM, Chrysler,1 package list 

12.Asian Snap-In coding is 201-FB000070 for Toyota, Hyundai, Kia, Ford, 1 package list 

13.North American Extended Flange Mount coding is 201-FB000071 for Ford, 1 package list 

14.Iveco Slide & Lock  coding is 201-FB000072 for Iveco,1 package list 

15.5 and 9 accessories  coding is 201-FB000073, 2 package lists 

16. VW Snap-In coding is 201-FB000074 for Volkswagen, Audi,1 package list 

17.Remove the piece coding is 201-FB000075,1 package list 

18.Hardness care tools coding is 304-OBD00007,8 package lists

Harness Technical Specifications

Weight: 156 g

Size: Max Length:770mm,Max Width:83mm

Material:Universal Core Connector:Nylon       Wire Jacker:Mesh Sheathing

Connectors: 2 x universal Core Connector     1 x 24V Compatible ALDL Connector

Power Output: 8 V to 36 V

Current Rating: 5 A

Temperature Rating: -40 to +85°C

Hardness Installation Instructions

1. Start with the Geolocation system unplugged from the vehicles.Remove the in-vehicles OBDII connector from its slot.

2. Attach the female universal core connector (short end) of the hardness to the appropriate adapter (see Adapters section on page2) matching the required installation.

3. Secure the adapter in place using the provided metal clips and ensure that they latch in 

4.Fasten the female universal core connector (short end) of the hardness the vehicle’s OBDII slot and secure in place using either screws or the plastic clips on the adapters.

5.Connect the device to the female universal core connector (long end) of the hardness.

6.Connect the male OBDII hardness connector to the vehicle’s OBDII connector removed in Step1.

 

Completed Setup

European Latch and Snap

Note:replace Step 2 of the standard installation instructions with the following steps for Fiat ,Citröen or Peugeot vehicles using the European Latch and Snap adapter.

1.Slide the European Latch and Snap all the way to the back of the core connector.

 

2.Insert the small snap adapter onto the wire behind the core connector.

3.Slide the small snap adapter from the back of the hardness.Ensure that the European Latch and Snap is securely interlocked.

Ford Round Snap-In

Note:Replace Step 2 of the standard installation instructions with the following steps for Ford vehicles using the Ford Round Snap-In adapter.

1.Slide the Ford Round Snap-In all the way to the back of the core connector.

2.Using the insert/removal tool,secure the adapter in place using the provided metal clips and ensure that they latch in.

 

 

Insertion and Removal of Mental Clips

The metal clips used to secure the adapters can be inserted by hand—with the exception of Ford Round Snap-In (#10) adapter,which requires the use of the insertion end of the insert/removal tool include with the hardness kit.The removal of clips requires the use of the removal end of the insert/removal tool.

Insert

Attach the required adapter to the core connector of the hardness and secure the metal clips in place with your hands.

 

Remove

Remove the metal clips from the adapter by pulling them off using the removal end of the insertion/removal tool.

Important Safety Information and Limitation of Use

Do not attempt to install,configure or remove any product from any vehicles while the vehicles is in motion or otherwise in operation.All installation,configuration or removal must be done only in stationary vehicles which are securely parked.Attempting to service units while being operated could result in malfunctions or accidents,leading to death or serious personal injury.

All in-vehicles devices and related cabling must be securely fastened and kept clear of all vehicle controls,including gas,brake and clutch pedals.You must inspect devices and cabling on a regular basis to ensure all devices and cabling continue to be securely attached.Loose cabling or devices may impede the use of vehicle controls,resulting in unanticipated acceleration,braking or other loss of vehicle control,which could lead to death or serious personal injury.Improperly fastened in-vehicle devices may detach and impact operators upon sudden acceleration or deceleration,which may  cause injury.

If at any point after an in-vehicles device is installed a warning lights up on the vehicle dash or the vehicles stalls or has a marked drop in performance,shut off the engine,remove the device,and contact your reseller.Continuing to operate a vehicle with these symptoms can cause loss of vehicles control,and serious injury.

Your in-vehicle devices must be kept clear of debris,water and other environmental contaminants.Failure to do so many result in units malfunctioning or short-circuiting that can lead to a fire hazard or vehicles damage or serious injury.

Do not attempt to remove the devices from the vehicles in which they are originally installed for installation in another vehicle.Not all vehicles share compatibility,and doing so may result in unexpected interactions with your vehicles,including sudden loss of of power or shutdown of the vehicle’s engine while in operation or cause your vehicle to operate poorly erratically and cause death or serious injury and /or vehicle damage.

Notice-This product does not contain any user-serviceable parts.

Configuration,servicing,and repairs must only be made by an authorized reseller or installer.Unauthorized servicing of these products will void your product warranty.

 

The OBD T CABLE is an OBDII T-harness kit with fifteen mounting brackets for connecting a Geolocation system to most light-duty and medium -duty vehicles internationally.

The OBD T CABLE contains the mounting adapters listed below.

North American Flange Mount                       European Latch &Snap

North American Extended Flange Mount      VW Snap-In

North American Snap-In Mount                     BMW Slide & Lock

North American Slide & Lock Mount             Ford Round Snap-In

European Lock Mount                                     Iveco Slide & Lock

Asian Snap-In                                                  Volvo Slide Mount

 

1. Volvo Slide Mount coding is 201-FB000059 for Volvo,1 package list

2.North American Snap-In Mount coding is 201-FB000060 for Chrysler, 1 package list 

3.BMW coding is 201-FB000061 for BMW,1 package list

4.European Lock Mount coding is 201-FB000062 for Mercedes,BMW, 1 package list 

5.European Latch& Snap coding is 201-FB000063 for Fiat, Citröen, Peugeot, 1 package list 

6.BMW Slide & Lock coding is 201-FB000064 for BMW,1 package list 

7.Honda coding coding is 201-FB000065 for Honda,1 package list 

8.Ford Round Snap-In coding is 201-FB000066 for Ford,1 package list 

9.Citröen,Renault S.A coding is 201-FB000067 for Citröen,Renault S.A,  1 package list  

10.North American Slide & Lock Mount coding is 201-FB000068 for Ford, GM,  1 package list 

11.North American Flange Mount coding is 201-FB000069 for Ford, GM, Chrysler,1 package list 

12.Asian Snap-In coding is 201-FB000070 for Toyota, Hyundai, Kia, Ford, 1 package list 

13.North American Extended Flange Mount coding is 201-FB000071 for Ford, 1 package list 

14.Iveco Slide & Lock  coding is 201-FB000072 for Iveco,1 package list 

15.5 and 9 accessories  coding is 201-FB000073, 2 package lists 

16. VW Snap-In coding is 201-FB000074 for Volkswagen, Audi,1 package list 

17.Remove the piece coding is 201-FB000075,1 package list 

18.Hardness care tools coding is 304-OBD00007,8 package lists

Harness Technical Specifications

Weight: 156 g

Size: Max Length:770mm,Max Width:83mm

Material:Universal Core Connector:Nylon       Wire Jacker:Mesh Sheathing

Connectors: 2 x universal Core Connector     1 x 24V Compatible ALDL Connector

Power Output: 8 V to 36 V

Current Rating: 5 A

Temperature Rating: -40 to +85°C

Hardness Installation Instructions

1. Start with the Geolocation system unplugged from the vehicles.Remove the in-vehicles OBDII connector from its slot.

2. Attach the female universal core connector (short end) of the hardness to the appropriate adapter (see Adapters section on page2) matching the required installation.

3. Secure the adapter in place using the provided metal clips and ensure that they latch in 

4.Fasten the female universal core connector (short end) of the hardness the vehicle’s OBDII slot and secure in place using either screws or the plastic clips on the adapters.

5.Connect the device to the female universal core connector (long end) of the hardness.

6.Connect the male OBDII hardness connector to the vehicle’s OBDII connector removed in Step1.

 

Completed Setup

European Latch and Snap

Note:replace Step 2 of the standard installation instructions with the following steps for Fiat ,Citröen or Peugeot vehicles using the European Latch and Snap adapter.

1.Slide the European Latch and Snap all the way to the back of the core connector.

 

2.Insert the small snap adapter onto the wire behind the core connector.

3.Slide the small snap adapter from the back of the hardness.Ensure that the European Latch and Snap is securely interlocked.

Ford Round Snap-In

Note:Replace Step 2 of the standard installation instructions with the following steps for Ford vehicles using the Ford Round Snap-In adapter.

1.Slide the Ford Round Snap-In all the way to the back of the core connector.

2.Using the insert/removal tool,secure the adapter in place using the provided metal clips and ensure that they latch in.

 

 

Insertion and Removal of Mental Clips

The metal clips used to secure the adapters can be inserted by hand—with the exception of Ford Round Snap-In (#10) adapter,which requires the use of the insertion end of the insert/removal tool include with the hardness kit.The removal of clips requires the use of the removal end of the insert/removal tool.

Insert

Attach the required adapter to the core connector of the hardness and secure the metal clips in place with your hands.

 

Remove

Remove the metal clips from the adapter by pulling them off using the removal end of the insertion/removal tool.

Important Safety Information and Limitation of Use

Do not attempt to install,configure or remove any product from any vehicles while the vehicles is in motion or otherwise in operation.All installation,configuration or removal must be done only in stationary vehicles which are securely parked.Attempting to service units while being operated could result in malfunctions or accidents,leading to death or serious personal injury.

All in-vehicles devices and related cabling must be securely fastened and kept clear of all vehicle controls,including gas,brake and clutch pedals.You must inspect devices and cabling on a regular basis to ensure all devices and cabling continue to be securely attached.Loose cabling or devices may impede the use of vehicle controls,resulting in unanticipated acceleration,braking or other loss of vehicle control,which could lead to death or serious personal injury.Improperly fastened in-vehicle devices may detach and impact operators upon sudden acceleration or deceleration,which may  cause injury.

If at any point after an in-vehicles device is installed a warning lights up on the vehicle dash or the vehicles stalls or has a marked drop in performance,shut off the engine,remove the device,and contact your reseller.Continuing to operate a vehicle with these symptoms can cause loss of vehicles control,and serious injury.

Your in-vehicle devices must be kept clear of debris,water and other environmental contaminants.Failure to do so many result in units malfunctioning or short-circuiting that can lead to a fire hazard or vehicles damage or serious injury.

Do not attempt to remove the devices from the vehicles in which they are originally installed for installation in another vehicle.Not all vehicles share compatibility,and doing so may result in unexpected interactions with your vehicles,including sudden loss of of power or shutdown of the vehicle’s engine while in operation or cause your vehicle to operate poorly erratically and cause death or serious injury and /or vehicle damage.

Notice-This product does not contain any user-serviceable parts.

Configuration,servicing,and repairs must only be made by an authorized reseller or installer.Unauthorized servicing of these products will void your product warranty.

 

VXDAS Policy

1.Return Policy

2.Refund Policy

3.Returning for replacement

4.Our product guarantee

5.Repair Policy

Before returning items to us, please read and follow the instructions below. You can also contact our Customer Service, we will be glad to help you.

Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.


Return Policy

Mis-Ordered Products: If you order wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this.

Quality Issue: our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our return policy will be open for you.

Non Quality Issues: In some particular situation, our return policy can be open for you after our customer service learning your particular problem, and in this condition we will charge you 10% handling fee.

Shipping options for return items: when you confirm to return the items to us, please use simple airmail or EMS to return it, and write shipping address our customer service provides. Please do not use DHL, UPS, FEDEX and TNT or any other courier, because we can not get your return item, we will not responsible for that.


Refund policy

After we get your item return to us and check the item in good condition, we will issue you refund according to our policy within 2 working days through PayPal, please check your PayPal account timely or contact our customer service, and we we will  charge you 10% handling fee.

If you have any doubt, please check with our customer service.


Returning for replacement

When exchange for free: If your products encounter crash in delivery, we will exchange it for free for you and you undertake the shipping cost for your ship item back to us through simple airmail.

Mis-ordered products: If you order a wrong item and plan to exchange for you want, then just contact our customer service for help,if we can exchange for you, you need to pay the shipping cost to us as well as return to you.

Physical Damaged Items: If the item is damaged by yourself, we can not provide exchange service for you. But you can return for repair.

What you do before returning for replacement: you need contact our customer service to tell us your problem. What's wrong with your item and what you want us to do for you.

Returning shipping options: after confirming your items is under our policy of returning, we please you use simple airmail to ship item back to us. NO DHL, UPS, TNT, Fedex or any other express.

How we will do after receiving your return: you need keep touch with us to make sure we get it. After checking the item, we will arrange a replacement for you and we will inform you when everything is done. Please remember to check your email from time to time.


Our product guarantee

1 Year Warranty: the guarantee of our most products is one year. 

Before shipping out, all goods have been double verified by vxdas.com. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard.  After finish quality check,our QC stuff will carefully do quality check and paste our own QC label in the form of month/date/year on every product.

If you have any using problem of the products which buy from vxdas.com, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee.


Repair Policy

When your product get damaged after using some time and need repair, we provide repair service for you. Please contact with vxdas.com customer service about the repair.

You need use simple airmail to send the item back to us, after we fix it, we will send back to you. We will not charge you for simple airmail ship back, but if you ask for express shipping, you need to pay for this.


Any other questions, please feel free to contact vxdas.com customers service.

 

VXDAS Policy

1.Return Policy

2.Refund Policy

3.Returning for replacement

4.Our product guarantee

5.Repair Policy

Before returning items to us, please read and follow the instructions below. You can also contact our Customer Service, we will be glad to help you.

Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.


Return Policy

Mis-Ordered Products: If you order wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this.

Quality Issue: our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our return policy will be open for you.

Non Quality Issues: In some particular situation, our return policy can be open for you after our customer service learning your particular problem, and in this condition we will charge you 10% handling fee.

Shipping options for return items: when you confirm to return the items to us, please use simple airmail or EMS to return it, and write shipping address our customer service provides. Please do not use DHL, UPS, FEDEX and TNT or any other courier, because we can not get your return item, we will not responsible for that.


Refund policy

After we get your item return to us and check the item in good condition, we will issue you refund according to our policy within 2 working days through PayPal, please check your PayPal account timely or contact our customer service, and we we will  charge you 10% handling fee.

If you have any doubt, please check with our customer service.


Returning for replacement

When exchange for free: If your products encounter crash in delivery, we will exchange it for free for you and you undertake the shipping cost for your ship item back to us through simple airmail.

Mis-ordered products: If you order a wrong item and plan to exchange for you want, then just contact our customer service for help,if we can exchange for you, you need to pay the shipping cost to us as well as return to you.

Physical Damaged Items: If the item is damaged by yourself, we can not provide exchange service for you. But you can return for repair.

What you do before returning for replacement: you need contact our customer service to tell us your problem. What's wrong with your item and what you want us to do for you.

Returning shipping options: after confirming your items is under our policy of returning, we please you use simple airmail to ship item back to us. NO DHL, UPS, TNT, Fedex or any other express.

How we will do after receiving your return: you need keep touch with us to make sure we get it. After checking the item, we will arrange a replacement for you and we will inform you when everything is done. Please remember to check your email from time to time.


Our product guarantee

1 Year Warranty: the guarantee of our most products is one year. 

Before shipping out, all goods have been double verified by vxdas.com. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard.  After finish quality check,our QC stuff will carefully do quality check and paste our own QC label in the form of month/date/year on every product.

If you have any using problem of the products which buy from vxdas.com, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee.


Repair Policy

When your product get damaged after using some time and need repair, we provide repair service for you. Please contact with vxdas.com customer service about the repair.

You need use simple airmail to send the item back to us, after we fix it, we will send back to you. We will not charge you for simple airmail ship back, but if you ask for express shipping, you need to pay for this.


Any other questions, please feel free to contact vxdas.com customers service.

 

Recently Viewed Products Recently Viewed Products