KTM Flash ECU Programmer & Transmission Power Upgrade Tool Via OBD Support 271 MSV80 MSV90 KTM Flash ECU Programmer & Transmission Power Upgrade Tool Via OBD Support 271 MSV80 MSV90

ET242-A
1.0kg
ECU Remapping & Programmer
$329.00 $229.00 28%
-
+
Buy it now
KTM Flash ECU Programmer & Transmission Power Upgrade Tool Via OBD Support 271 MSV80 MSV90
$329.00 $229.00 28%
-
+
Buy it now

KTMflash ECU Programmer & Transmission Power Upgrade Tool Support V-A-G DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90. Read the chip data, read & write ECU data,read transmission data etc, the speed is very fast.

ktm flash codes

KTMflash ECU Programmer Highlighs

  • 1.Software Version: PCMFlash 1.1.95
  • 2. Supports V-A-G DQ200 DQ 250 DQ500 VL381 DL501 Transmission, read Infineon via boot mode etc.
  • 3. Support 271 MSV80 MSV90 
  • 4. With PowerBox for PCMFlash KTM JTAG for Hitachi and DiaLink J2534 for free
  • 5. Read the chip data, read and write ECU data, read transmission data etc at a high speed.
  • V1.95 KTMflash ECU Programmer Software Download Link:

    https://mega.nz/folder/4fwBXSqb#ER1nVpQBYZ4-hhldXSXvWQ

     

    Note: The white switch box tags: PowerBox for PCMFlash and KTM JTAG for Hitachi are the same device, It just the tags different, all of the functions are the same. Factory will ship randomly.

     

    KTMflash ECU Programmer Functions:

    1. Workable Transmission Model

    2. Read Chinese car via OBD

    3. Read BOOT mode according to the chip model

    4. Read the encrypted ECU password (Read the password of encrypted ECU first, then read data) Support Chinese car ME17 TC1728/1767 data reading & writing and password reading

     

    KTMflash ECU Programmer Workable Transmission Model:

    VAG: DQ200 (0AM)

    VAG: DQ200MQB/G2 (0CW) 

    VAG: DQ250C (02E) K-Line

    VAG: DQ250E/F (02E)

    VAG: DQ250MQB (0D9) 

    VAG: VL300/V30 (01J/0AN) K-Line 

    VAG: VL300/V30 (01J/0AN)

    VAG: VL381 (0AW) 

    VAG: DQ500 (0BH/0BT) 

    VAG: DL501/G2 (0B5) 

    VAG: DQ200/MQB Boot (MICRO) 

    VAG: DQ200/MQB Boot (EEPROM) 

    VAG: DQ200G2 Boot (MICRO) 

    VAG: DQ200G2 Boot (EEPROM) 

    VAG: DQ250E/F/MQB Boot (MICRO) 

    VAG: DQ250E/F/MQB Boot (EEPROM) 

    VAG: VL300/V30 BSL (FLASH)

    VAG: VL300/V30 BSL (EEPROM) 

    VAG: VL381 Boot (MICRO) 

    VAG: VL381 Boot (EEPROM) 

    VAG: DL501 Boot (MICRO) 

    VAG: DL501 Boot (EEPROM)

    VAG: DL501G2 Boot (MICRO) 

    VAG: DL501G2 Boot (EEPROM)

     

    KTMflash ECU Programmer Read Chinese car via OBD:

    China: for Chery, for Great Wall, for Lifan, for SAIC ME17 (ME17.8.8)

    China: for Chery, for Great Wall, for Lifan MT80 K-Line Calibration (Delphi MT80)

    China: for Chery, for Great Wall, for Lifan MT80 CAN-bus (Delphi MT80)


    KTMflash ECU Programmer Read the BOOT mode according to the chip model:

    Infineon: TC1762/TC1766 MICRO (1504KB) 
    Infineon: TC1762/TC1766 EEPROM (32KB) 
    Infineon: TC1792/TC1796 MICRO (2048KB) 
    Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 
    Infineon: TC1796 EXT (2048KB/4096KB) 
    Infineon: TC1796 EEPROM (128KB) 
    Infineon: TC1792 EEPROM (64KB) 
    Infineon: TC1738/TC1767 MICRO (2048KB)
    Infineon: TC1738/TC1767 EEPROM (64KB) 
    Infineon: TC1797 MICRO (4096KB) 
    Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
    Infineon: TC1797 EXT (2048KB/4096KB) 
    Infineon: TC1797 EEPROM (64KB) 
    Infineon: TC1724/TC1728 MICRO (1536KB)
    Infineon: TC1724/TC1728 EEPROM (64KB) 
    Infineon: TC1782/TC1784 MICRO (2560KB) 
    Infineon: TC1782/TC1784 EEPROM (128KB) 
    Infineon: TC1793/TC1798 MICRO (4096KB) 
    Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 
    Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 
    Infineon: TC1793/TC1798 EEPROM (192KB) 

    KTMflash Read the encrypted ECU password (Read the password of encrypted ECU first, then read data):

    Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading
    Bosch: BM-W/MB/VAG GPT 
    Bosch: Ford/Opel/Volvo GPT 
    Bosch: BM-W TPROT8+ 
    Bosch: VAG TPROT8+ 
    Bosch: Kia/Hyundai/Honda TPROT8+ 
    Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 
    Bosch: VAZ/UAZ ME17.9.71  
    Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 
    Continental: Ford EMS2204
    Continental: Ford EMS2207 
    Continental: Ford EMS2211
    Continental: Ford SID208 
    Continental: Ford SID209 
    Continental: Ford Mondeo 4 SID807EVO
    Continental: Ford Focus 3/Transit Connect SID807EVO 
    Continental: Citroen/Peugeot SID208 
    Kia/Hyundai: Delphi MT86 EEPROM (16KB) 
    Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 

    How to use KTM FlASH ECU programmer Switch board? 

    1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram. 
     
    2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
     
    3. There are 3 types of Bosch Infineon ECU : 
    1) The Infineon ECU before TPROT8.
    2) TPROT8-10 
    3) The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
     
    4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point 
    grounding, then follow the Ktag user manual to wire the cable and read the data. 
     
    5. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.

    6. For TPROT8-10,the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
    Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 

    2 tips on reading the data: 

    1) BOOT and CNF1 must be connected when reading data. 
    2) Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose " Manually" then follow the message to turn on or off.


    KTMflash ECU Programmer Package includes:

    1pc x KTMflash ECU Programmer

    1pc x KTMflash USB Dongle

    KTMflash ECU Programmer & Transmission Power Upgrade Tool Support V-A-G DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90. Read the chip data, read & write ECU data,read transmission data etc, the speed is very fast.

    ktm flash codes

    KTMflash ECU Programmer Highlighs

  • 1.Software Version: PCMFlash 1.1.95
  • 2. Supports V-A-G DQ200 DQ 250 DQ500 VL381 DL501 Transmission, read Infineon via boot mode etc.
  • 3. Support 271 MSV80 MSV90 
  • 4. With PowerBox for PCMFlash KTM JTAG for Hitachi and DiaLink J2534 for free
  • 5. Read the chip data, read and write ECU data, read transmission data etc at a high speed.
  • V1.95 KTMflash ECU Programmer Software Download Link:

    https://mega.nz/folder/4fwBXSqb#ER1nVpQBYZ4-hhldXSXvWQ

     

    Note: The white switch box tags: PowerBox for PCMFlash and KTM JTAG for Hitachi are the same device, It just the tags different, all of the functions are the same. Factory will ship randomly.

     

    KTMflash ECU Programmer Functions:

    1. Workable Transmission Model

    2. Read Chinese car via OBD

    3. Read BOOT mode according to the chip model

    4. Read the encrypted ECU password (Read the password of encrypted ECU first, then read data) Support Chinese car ME17 TC1728/1767 data reading & writing and password reading

     

    KTMflash ECU Programmer Workable Transmission Model:

    VAG: DQ200 (0AM)

    VAG: DQ200MQB/G2 (0CW) 

    VAG: DQ250C (02E) K-Line

    VAG: DQ250E/F (02E)

    VAG: DQ250MQB (0D9) 

    VAG: VL300/V30 (01J/0AN) K-Line 

    VAG: VL300/V30 (01J/0AN)

    VAG: VL381 (0AW) 

    VAG: DQ500 (0BH/0BT) 

    VAG: DL501/G2 (0B5) 

    VAG: DQ200/MQB Boot (MICRO) 

    VAG: DQ200/MQB Boot (EEPROM) 

    VAG: DQ200G2 Boot (MICRO) 

    VAG: DQ200G2 Boot (EEPROM) 

    VAG: DQ250E/F/MQB Boot (MICRO) 

    VAG: DQ250E/F/MQB Boot (EEPROM) 

    VAG: VL300/V30 BSL (FLASH)

    VAG: VL300/V30 BSL (EEPROM) 

    VAG: VL381 Boot (MICRO) 

    VAG: VL381 Boot (EEPROM) 

    VAG: DL501 Boot (MICRO) 

    VAG: DL501 Boot (EEPROM)

    VAG: DL501G2 Boot (MICRO) 

    VAG: DL501G2 Boot (EEPROM)

     

    KTMflash ECU Programmer Read Chinese car via OBD:

    China: for Chery, for Great Wall, for Lifan, for SAIC ME17 (ME17.8.8)

    China: for Chery, for Great Wall, for Lifan MT80 K-Line Calibration (Delphi MT80)

    China: for Chery, for Great Wall, for Lifan MT80 CAN-bus (Delphi MT80)


    KTMflash ECU Programmer Read the BOOT mode according to the chip model:

    Infineon: TC1762/TC1766 MICRO (1504KB) 
    Infineon: TC1762/TC1766 EEPROM (32KB) 
    Infineon: TC1792/TC1796 MICRO (2048KB) 
    Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 
    Infineon: TC1796 EXT (2048KB/4096KB) 
    Infineon: TC1796 EEPROM (128KB) 
    Infineon: TC1792 EEPROM (64KB) 
    Infineon: TC1738/TC1767 MICRO (2048KB)
    Infineon: TC1738/TC1767 EEPROM (64KB) 
    Infineon: TC1797 MICRO (4096KB) 
    Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
    Infineon: TC1797 EXT (2048KB/4096KB) 
    Infineon: TC1797 EEPROM (64KB) 
    Infineon: TC1724/TC1728 MICRO (1536KB)
    Infineon: TC1724/TC1728 EEPROM (64KB) 
    Infineon: TC1782/TC1784 MICRO (2560KB) 
    Infineon: TC1782/TC1784 EEPROM (128KB) 
    Infineon: TC1793/TC1798 MICRO (4096KB) 
    Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 
    Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 
    Infineon: TC1793/TC1798 EEPROM (192KB) 

    KTMflash Read the encrypted ECU password (Read the password of encrypted ECU first, then read data):

    Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading
    Bosch: BM-W/MB/VAG GPT 
    Bosch: Ford/Opel/Volvo GPT 
    Bosch: BM-W TPROT8+ 
    Bosch: VAG TPROT8+ 
    Bosch: Kia/Hyundai/Honda TPROT8+ 
    Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 
    Bosch: VAZ/UAZ ME17.9.71  
    Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 
    Continental: Ford EMS2204
    Continental: Ford EMS2207 
    Continental: Ford EMS2211
    Continental: Ford SID208 
    Continental: Ford SID209 
    Continental: Ford Mondeo 4 SID807EVO
    Continental: Ford Focus 3/Transit Connect SID807EVO 
    Continental: Citroen/Peugeot SID208 
    Kia/Hyundai: Delphi MT86 EEPROM (16KB) 
    Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 

    How to use KTM FlASH ECU programmer Switch board? 

    1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram. 
     
    2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
     
    3. There are 3 types of Bosch Infineon ECU : 
    1) The Infineon ECU before TPROT8.
    2) TPROT8-10 
    3) The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
     
    4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point 
    grounding, then follow the Ktag user manual to wire the cable and read the data. 
     
    5. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.

    6. For TPROT8-10,the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
    Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 

    2 tips on reading the data: 

    1) BOOT and CNF1 must be connected when reading data. 
    2) Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose " Manually" then follow the message to turn on or off.


    KTMflash ECU Programmer Package includes:

    1pc x KTMflash ECU Programmer

    1pc x KTMflash USB Dongle

    KTMflash CEU Programmer Software V1.94 Download Link:

    https://mega.nz/#F!wwIkFIbY!9T2jpy3MngFBq5iOzdphag

    KTMflash ECU Programmer & Transmission Power Upgrade Tool Software And Driver Install Guide

    KTMflash CEU Programmer Software V1.94 Download Link:

    https://mega.nz/#F!wwIkFIbY!9T2jpy3MngFBq5iOzdphag

    KTMflash ECU Programmer & Transmission Power Upgrade Tool Software And Driver Install Guide

    Recently Viewed Products Recently Viewed Products