VXDAS NT510 Full System Car Diagnostic Tool Supports All OBD2 Functions support Multi Language VXDAS NT510 Full System Car Diagnostic Tool Supports All OBD2 Functions support Multi Language

ED536
0.5kg
Car Diagnostic Tool
$69.99 $48.99 30%
-
+

VXDAS NT510 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car.

And the NT510 obdii code reader will read codes indicating these fault parts. After the car problems have been solved, VXDAS NT510 code reader car diagnostic tool can erase these trouble codes and turn off check engine light.

VXDAS NT510

 

Full OBD Functions:

1. Diagnostic trouble codes for the check engine light, turns off Malfunction Indicator Lamp (MIL), resets monitors

2. One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification

3. Views freeze frame data, shows vehicle parameters recorded by ECU when an emission-related fault occurs

4. O2 Sensor Test , accurately identifies failures of Oxygen sensor and vehicle emissions related errors.

5. Advanced On-board Monitoring (Component Test)(Mode 6)

6. EVAP Test of Fuel Tank System (Mode 8)

 

 

 

Data Review

Review function can review for DTC, DataStream, Freeze Frame,etc, it can also quickly help you to delete these datas (Others may only support one of them)

 

Excellent Performance

Powerful STM32F series chip, read the results in seconds and quickly understand what’s happening to your car.

Safety circuit board, more stable, can protect your car from damage if there are the equipment failure.

 

Lifetime Update & Print

Connect the NT510 car scanner to the PC directly, and select the stored data(Data Stream, Freeze Data, DTC or All) on scanner and upload to computer, data editable before printing out from PC.

 

Exquisite packaging

With this VXDAS NT510 protection carrying case, you can prevent it from being damaged whether you place it in a trunk, toolbox, or garage. 

 

 

 

Accurate Battery Test

Check with the real time battery Voltage, and better know your car's status with the voltage.

Before Ignition:

  • <10.8V-- Battery Voltage Too Low, Need to Change Battery
  • 10.8V--11.8V-- Voltage Slightly Low, Maybe Difficult to Start Ignition
  • 11.8V--12.8V—Normal Battery Voltage, Good Battery Status! 
  •  After Ignition: 

  • 12.8V--13.2V-- Battery Voltage Too Low, Alternator Might Not Able to Charge
  • 13.2V--14.8V-- Normal Battery Voltage, Alternator Charging Normal
  • 14.8V-- Caution! High Battery Voltage Detected, Might Damage the Battery, Please Check the Engine Stabilizer
  •  

     DTC Lookup

    The DTC library Shows the code and what the code means directly with 30000+ comprehensive codes to save the time of you to detect problems of your vehicles, and without searching on the internet for a long time.

     

     Vehicle Information

    Retrieve Vehicle Information such as VIN (vehicle identification number), CID(Calibration identifications) , CVD(Calibration Verification Numbers) etc. Check with your car Information anytime you want.

     

     One Click I/M Readiness

    Display the vehicle's status data of various Emissions-related System to indicate whether the vehicle's monitors have run and completed their testing or not.

    Test your vehicle with fault codes readers before you go to SMOG CHECK, help you to get fully prepared for emission inspection and get passed.

     

     

    VXDAS NT510 Special Features

    ·Read and Clear Codes: read and clear engine codes, generic, manufacturer specific, and pending codes. 

    ·Live Data: read and record live sensor data, 4 parameters comparison supported. 

    ·Freeze Frame: a snapshot of the vehicle which shows engine conditions when the MIL on.

    ·O2 Sensor: check the vehicle O2 sensor values. 

    ·Mode 6: advanced test results (like misfire counts) for on-board diagnostic system monitors. 

    ·Mode 8(Component test): allows initiating a leak test for the vehicle's EVAP system. 

     ·I/M Readiness: check the operations of the Emission System on OBD2 compliant vehicles. 

    ·Battery Test: show battery voltage and comment battery status. 

    ·Smog Check: indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. 

    ·MIL Status: MIL is essentially an emission warning light. If the light comes on, it means the OBD II system has detected an emissions-related problem. 

    ·Vehicle Info: check the make, years, VIN Code and other detail information of your vehicle. 

    ·Fuel Analysis: allow viewing the fuel economy of the vehicle. 

    ·Core Analysis: allow viewing the performance of the vehicle. 

    ·Engine Analysis: allow viewing the engine data of the vehicle

     

    Vehicle Coverage:

    Works with almost all standard OBD2/EOBD protocols gasoline cars.

     

    Support all OBD2/EOBD standard protocols

    SAE_J1850(PWM, VPW), ISO_9141-2, ISO_14230-4(KWP, KWP-FAST), ISO_15765-4(CAN, CAN-B, CAN-C, CAN-D), SAE_J1939(CAN)

     

    WARRANTY POLICIES

    Limited one year warranty for hardware and  one year NEXZCHECK App upgrade.

     

    No Warranty Provided in Following Conditions:

    -Warranty service is not Provided beyond the warranty period. 

    -Product damage caused by incorrect installation or improper operation. 

    -Self-modification, replacement of internal parts, and other man-made damage, etc. 

    -Product damaged by natural disasters, accidents, infiltration of liquids, etc.

     

    Package List 

    1pc x VXDAS NT510

    1pc x User's Manual

    1pc x USB Cable

    1pc x OBD2 cable

    VXDAS NT510 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car.

    And the NT510 obdii code reader will read codes indicating these fault parts. After the car problems have been solved, VXDAS NT510 code reader car diagnostic tool can erase these trouble codes and turn off check engine light.

    VXDAS NT510

     

    Full OBD Functions:

    1. Diagnostic trouble codes for the check engine light, turns off Malfunction Indicator Lamp (MIL), resets monitors

    2. One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification

    3. Views freeze frame data, shows vehicle parameters recorded by ECU when an emission-related fault occurs

    4. O2 Sensor Test , accurately identifies failures of Oxygen sensor and vehicle emissions related errors.

    5. Advanced On-board Monitoring (Component Test)(Mode 6)

    6. EVAP Test of Fuel Tank System (Mode 8)

     

     

     

    Data Review

    Review function can review for DTC, DataStream, Freeze Frame,etc, it can also quickly help you to delete these datas (Others may only support one of them)

     

    Excellent Performance

    Powerful STM32F series chip, read the results in seconds and quickly understand what’s happening to your car.

    Safety circuit board, more stable, can protect your car from damage if there are the equipment failure.

     

    Lifetime Update & Print

    Connect the NT510 car scanner to the PC directly, and select the stored data(Data Stream, Freeze Data, DTC or All) on scanner and upload to computer, data editable before printing out from PC.

     

    Exquisite packaging

    With this VXDAS NT510 protection carrying case, you can prevent it from being damaged whether you place it in a trunk, toolbox, or garage. 

     

     

     

    Accurate Battery Test

    Check with the real time battery Voltage, and better know your car's status with the voltage.

    Before Ignition:

  • <10.8V-- Battery Voltage Too Low, Need to Change Battery
  • 10.8V--11.8V-- Voltage Slightly Low, Maybe Difficult to Start Ignition
  • 11.8V--12.8V—Normal Battery Voltage, Good Battery Status! 
  •  After Ignition: 

  • 12.8V--13.2V-- Battery Voltage Too Low, Alternator Might Not Able to Charge
  • 13.2V--14.8V-- Normal Battery Voltage, Alternator Charging Normal
  • 14.8V-- Caution! High Battery Voltage Detected, Might Damage the Battery, Please Check the Engine Stabilizer
  •  

     DTC Lookup

    The DTC library Shows the code and what the code means directly with 30000+ comprehensive codes to save the time of you to detect problems of your vehicles, and without searching on the internet for a long time.

     

     Vehicle Information

    Retrieve Vehicle Information such as VIN (vehicle identification number), CID(Calibration identifications) , CVD(Calibration Verification Numbers) etc. Check with your car Information anytime you want.

     

     One Click I/M Readiness

    Display the vehicle's status data of various Emissions-related System to indicate whether the vehicle's monitors have run and completed their testing or not.

    Test your vehicle with fault codes readers before you go to SMOG CHECK, help you to get fully prepared for emission inspection and get passed.

     

     

    VXDAS NT510 Special Features

    ·Read and Clear Codes: read and clear engine codes, generic, manufacturer specific, and pending codes. 

    ·Live Data: read and record live sensor data, 4 parameters comparison supported. 

    ·Freeze Frame: a snapshot of the vehicle which shows engine conditions when the MIL on.

    ·O2 Sensor: check the vehicle O2 sensor values. 

    ·Mode 6: advanced test results (like misfire counts) for on-board diagnostic system monitors. 

    ·Mode 8(Component test): allows initiating a leak test for the vehicle's EVAP system. 

     ·I/M Readiness: check the operations of the Emission System on OBD2 compliant vehicles. 

    ·Battery Test: show battery voltage and comment battery status. 

    ·Smog Check: indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. 

    ·MIL Status: MIL is essentially an emission warning light. If the light comes on, it means the OBD II system has detected an emissions-related problem. 

    ·Vehicle Info: check the make, years, VIN Code and other detail information of your vehicle. 

    ·Fuel Analysis: allow viewing the fuel economy of the vehicle. 

    ·Core Analysis: allow viewing the performance of the vehicle. 

    ·Engine Analysis: allow viewing the engine data of the vehicle

     

    Vehicle Coverage:

    Works with almost all standard OBD2/EOBD protocols gasoline cars.

     

    Support all OBD2/EOBD standard protocols

    SAE_J1850(PWM, VPW), ISO_9141-2, ISO_14230-4(KWP, KWP-FAST), ISO_15765-4(CAN, CAN-B, CAN-C, CAN-D), SAE_J1939(CAN)

     

    WARRANTY POLICIES

    Limited one year warranty for hardware and  one year NEXZCHECK App upgrade.

     

    No Warranty Provided in Following Conditions:

    -Warranty service is not Provided beyond the warranty period. 

    -Product damage caused by incorrect installation or improper operation. 

    -Self-modification, replacement of internal parts, and other man-made damage, etc. 

    -Product damaged by natural disasters, accidents, infiltration of liquids, etc.

     

    Package List 

    1pc x VXDAS NT510

    1pc x User's Manual

    1pc x USB Cable

    1pc x OBD2 cable

    VXDAS 2020 Mid Year Sale

    VXDAS 2020 Mid Year Sale

    VXDAS NT510 Newest Software Download Link

    https://mega.nz/#F!QB4mwKwT!VnNhI_fdWMghGc-Za2jwHQ

    VXDAS NT510 Newest Software Download Link

    https://mega.nz/#F!QB4mwKwT!VnNhI_fdWMghGc-Za2jwHQ

    Recently Viewed Products Recently Viewed Products