Full protocol OBD2 jumper Breakout Tricore Cable is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
GODIAG Full Protocol OBD2 Jumper Cable for MPPS Kess V2 Fgtech Bench Work
1. Burst Points:
Breakout Tricore Cable
1) Supports DC power supply
2) Equipped with CAN protocol communication resistance.
3) With boot GND4 clip, compatible with programming equipment such as MPPS, FGTECH, and KESS V2.
4) Independent GND4, GND5 (meet the needs of special ECU programming).
5) With GND4 GND5 short-circuit switch (some ECUs need to be switched to short-circuit mode when programming.)
6) Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch.
7) With ignition analog switch (equipped with 1 large and 2 small dedicated ignition cables).
8) Supports safety protection banana head super programming dedicated connection port power supply.
9) Supports standard obd2 full protocol connection (double K line, double CAN line), 3 large and 2 small power plugs, 4 large GND, and 4 small GND.
2. Supported Models
BM-W 20, BENZ38, PSA- , DAIHATSU-4, FIAT-3, GAZ NISSAN-14 SUZUKI-3 A-UDI 4, BENZ 1, CHRYSLER 6, DAEWOO 12, FORD6+1, GM12, HONDA3, KIA20, MAZDA17, MITSUBISHI 12,SSANGYONG 20, SUBARU 9, TOYOTA 17, TOYOTA 22, BENZ 8, BENZ OD1 16
1). Connection Diagram of the Dedicated Programming Power Connector.
2). FGTECH Programming Connection Diagram
3).MPPS ECU Connection Diagram
4).KESS V2 ECU Connection Diagram
3. What is the analog ignition switch?
After the ING ignition switch is pressed, the line marked with ING12V will have 12v, which is the analog ignition switch. Because when some devices read some ECUs, the device will prompt to turn on or off the ignition switch.
4. Cable set contents:
1) 7 pin Knorr, Wabco Trailer Adapter Cable X 1
2) 12 pin MAN Adapter Cable X 1
3) 37 pin MAN Adapter Cable X 1
4) IVECO-30P Adapter Cable X 1
5) SCANIA -16P Adapter Cable X 1
6) BENZ-14P Adapter Cable X 1
7) Renault-12P Adapter Cable X 1
8) VOLVO-8P Adapter Cable X 1
5. Package Includes:
1pc x Full protocol OBD2 jumper
3pcs x Electrical resistances
Full protocol OBD2 jumper Breakout Tricore Cable is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
GODIAG Full Protocol OBD2 Jumper Cable for MPPS Kess V2 Fgtech Bench Work
1. Burst Points:
Breakout Tricore Cable
1) Supports DC power supply
2) Equipped with CAN protocol communication resistance.
3) With boot GND4 clip, compatible with programming equipment such as MPPS, FGTECH, and KESS V2.
4) Independent GND4, GND5 (meet the needs of special ECU programming).
5) With GND4 GND5 short-circuit switch (some ECUs need to be switched to short-circuit mode when programming.)
6) Note: The switch of GND4-5 is normally pressed to make it light. When some ECUs need to be independently connected to GND4 and GND5, release the switch.
7) With ignition analog switch (equipped with 1 large and 2 small dedicated ignition cables).
8) Supports safety protection banana head super programming dedicated connection port power supply.
9) Supports standard obd2 full protocol connection (double K line, double CAN line), 3 large and 2 small power plugs, 4 large GND, and 4 small GND.
2. Supported Models
BM-W 20, BENZ38, PSA- , DAIHATSU-4, FIAT-3, GAZ NISSAN-14 SUZUKI-3 A-UDI 4, BENZ 1, CHRYSLER 6, DAEWOO 12, FORD6+1, GM12, HONDA3, KIA20, MAZDA17, MITSUBISHI 12,SSANGYONG 20, SUBARU 9, TOYOTA 17, TOYOTA 22, BENZ 8, BENZ OD1 16
1). Connection Diagram of the Dedicated Programming Power Connector.
2). FGTECH Programming Connection Diagram
3).MPPS ECU Connection Diagram
4).KESS V2 ECU Connection Diagram
3. What is the analog ignition switch?
After the ING ignition switch is pressed, the line marked with ING12V will have 12v, which is the analog ignition switch. Because when some devices read some ECUs, the device will prompt to turn on or off the ignition switch.
4. Cable set contents:
1) 7 pin Knorr, Wabco Trailer Adapter Cable X 1
2) 12 pin MAN Adapter Cable X 1
3) 37 pin MAN Adapter Cable X 1
4) IVECO-30P Adapter Cable X 1
5) SCANIA -16P Adapter Cable X 1
6) BENZ-14P Adapter Cable X 1
7) Renault-12P Adapter Cable X 1
8) VOLVO-8P Adapter Cable X 1
5. Package Includes:
1pc x Full protocol OBD2 jumper
3pcs x Electrical resistances
