VXDAS FasTPMS Super EL-50448 TPMS Relearn Tire Presure Monitor Sensor Reset Activation Tool for G-M and Ford Series Vehicle VXDAS FasTPMS Super EL-50448 TPMS Relearn Tire Presure Monitor Sensor Reset Activation Tool for G-M and Ford Series Vehicle

TP20
0.009oz
TPMS Relearn Tools
$24.99 $19.99 20%
Buy it now
VXDAS FasTPMS Super EL-50448 TPMS Relearn Tire Presure Monitor Sensor Reset Activation Tool for G-M and Ford Series Vehicle
$24.99 $19.99 20%
-
+
Buy it now

Super EL50448 is new product, which is able to work with both G/M series and F/ord series TPMS relearn tool, Super EL50448 is essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires for G/M / Ch/evy / Bu*ick / G*MC / Op*el / F*ord / Lin*coln / Mer*cury etc.

  • 【Note:please check your car model whether it can work with super EL-50448 in the last pictures】TPMS tire pressure sensor on models in & after 2012 can be read, only with some specified diagnostic tools
  • Super EL-50448 tpms reset tool can help you reprogram all tires much easier just with 3 steps
  • Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
  • Tire pressure monitor sensor activation tool is simple, fast and easy to use, activates the individual TPM sensor with the press of one button
  • 【Different vehicle may need different times to reset all of your tire sensors after rotation】TPMS reset tire pressure monitor sensor tool for G-M and Ford Series Vehicle for 2010-2013, package does not include the charger and battery

 

VXDAS Tire Pressure TPMS Relearn Tool EL-50448 EL50448 for G-M Tire Pressure Sensors Activation Reset Tool

  • 1.Most of Ford and G-M vehicles equipped with a 315 or 433 MHz (TPMS) Tire Pressure Monitoring system,.a "Sensor Re-Learn Procedure" must be performed after tire rotations
  • 2.Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement.
  • 3.This re-learn procedure can be performed by using EL-50449 special tire pressure tool
  • 4.Super EL-50449 works on 2014 Ford and G-M models too.

 

Specific Methods To Read The Tire Pressure Sensor

Step 1 - Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to “ON”
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press “Set / Ctrl”
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode


Step 2 - Read tire pressure sensor information
Start from the front-left wheel, 
Make the J-46079 or Diagnostic Tool super EL-50449 antenna up against the valve core position & close to the rim of the tire sidewall
Super El-50449 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once


Step 3 - Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.

 

How to switch between G*M and F *ord brand?

Hold the power button for 3 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.


How to detetied which mode the device in?

Press the power button, if the Green LED flashing, means Super EL50448 in G*M mode, if the Yellow LED flashing, means Super EL50448 in F *ord mode.

 

How to use Super EL50448?

1. Need 1x Pcs 9V battery to work ----price not included that
2. Set the car in TPMS learning mode. (car horns twice)
3. Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.
4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.
5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.

Super EL50448 is new product, which is able to work with both G/M series and F/ord series TPMS relearn tool, Super EL50448 is essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires for G/M / Ch/evy / Bu*ick / G*MC / Op*el / F*ord / Lin*coln / Mer*cury etc.

  • 【Note:please check your car model whether it can work with super EL-50448 in the last pictures】TPMS tire pressure sensor on models in & after 2012 can be read, only with some specified diagnostic tools
  • Super EL-50448 tpms reset tool can help you reprogram all tires much easier just with 3 steps
  • Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
  • Tire pressure monitor sensor activation tool is simple, fast and easy to use, activates the individual TPM sensor with the press of one button
  • 【Different vehicle may need different times to reset all of your tire sensors after rotation】TPMS reset tire pressure monitor sensor tool for G-M and Ford Series Vehicle for 2010-2013, package does not include the charger and battery

 

VXDAS Tire Pressure TPMS Relearn Tool EL-50448 EL50448 for G-M Tire Pressure Sensors Activation Reset Tool

  • 1.Most of Ford and G-M vehicles equipped with a 315 or 433 MHz (TPMS) Tire Pressure Monitoring system,.a "Sensor Re-Learn Procedure" must be performed after tire rotations
  • 2.Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement.
  • 3.This re-learn procedure can be performed by using EL-50449 special tire pressure tool
  • 4.Super EL-50449 works on 2014 Ford and G-M models too.

 

Specific Methods To Read The Tire Pressure Sensor

Step 1 - Enter leaning mode
Set the gearshift lever to "P"
Put the ignition switch to “ON”
Enter the interface of tire pressure display by DIC
DIC shows "Press Set / Ctrl to re-learn"
Press “Set / Ctrl”
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode


Step 2 - Read tire pressure sensor information
Start from the front-left wheel, 
Make the J-46079 or Diagnostic Tool super EL-50449 antenna up against the valve core position & close to the rim of the tire sidewall
Super El-50449 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once


Step 3 - Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.

 

How to switch between G*M and F *ord brand?

Hold the power button for 3 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.


How to detetied which mode the device in?

Press the power button, if the Green LED flashing, means Super EL50448 in G*M mode, if the Yellow LED flashing, means Super EL50448 in F *ord mode.

 

How to use Super EL50448?

1. Need 1x Pcs 9V battery to work ----price not included that
2. Set the car in TPMS learning mode. (car horns twice)
3. Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.
4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.
5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.

Recently Viewed Products Recently Viewed Products