How to Program Proximity Keys for 2022 Ford Bronco Using OBDSTAR X300 Classic G3
The OBDSTAR X300 Classic G3 is a powerful key programming tool that can resolve various key programming issues, including the all keys lost situation for the 2022 Ford Bronco. This guide provides a step-by-step procedure to help you navigate through the programming process effectively.
Step-by-Step Procedure for Key Programming
1. Connect the Device
Start by correctly connecting the OBDSTAR X300 Classic G3 key programmer to the vehicle’s OBD port. This connection is crucial for successful communication between the key programmer and the vehicle's electronic system.
2. Navigate the Menu
Once connected, navigate through the programmer menu following this path:
- IMMO
- FORD/LINCOLN/ME
- FORD
- USA/CANADA
- BRONCO
- PROXIMITY
- 2021-2023
- All Keys Lost
3. Important Note: Dealing with the Anti-Theft Alarm
If the vehicle’s anti-theft alarm has been triggered, you will need to disable it prior to starting key programming. To disable the alarm:
- Close all doors and then open the driver’s door.
- Insert the proximity key into the induction card slot, or if using a blade key, insert it and turn the ignition ON.
- Wait for 10 to 15 minutes, during which the vehicle will beep twice to indicate that the alarm is disabled.
- Begin the key programming within 1 minute of the alarm being disabled.
4. Programming Instructions
During the programming process, all existing keys will be erased. You must have a minimum of 2 keys to proceed.
To start:
- Turn the ignition ON.
5. Retrieve and Enter Security Codes
Now it’s important to retrieve security codes:
- Record the displayed Outcode.
- Provide this Outcode to a third party to obtain the corresponding 24-digit Incode.
- Enter the Incode carefully into the device, ensuring accuracy.
6. Set Key Count
The system will show the key count, which should be set to 2. Confirm the erasure process completes successfully.
7. Program the First Smart Key
For the first smart key, place it in one of the following key sensing areas:
- Inside the armrest box
- Inside the buckle box
- Inside the cup holder
Follow the prompts provided by the programmer to successfully program the first key.
8. Program the Second Key
Repeat the previous steps to program the second smart key.
9. Verification
Once both keys have been programmed, the key count displayed should reflect that 2 keys have been successfully added. To confirm, turn the ignition ON and check for functionality.
Conclusion
By following these detailed steps, the OBDSTAR X300 Classic G3 Key Programmer can be effectively used to program two new proximity keys for the 2022 Ford Bronco. This method not only resolves the all keys lost situation but also ensures that the vehicle remains secure and operational.
For more information on automotive diagnostics and key programming tools, visit VXDAS.com.
