Launch X431 CRP919X BT Auto Diagnostic Tools Full System Diagnosis Support CANFD DOIP

Launch X431 CRP919X BT OBD2 Scanner Bidirectional Diagnostic Tool Wireless Diagnostic with DBScar VII, FCA AutoAuth, VAG Guided, ECU Coding, IMMO, upgraded of CRP919X.

LAUNCH X431 CRP919X BT Highlights:

1. All System Diagnosis + 31 Reset Service

2. Active Test ( Bi-Directional Test)

3. ECU Online Coding ( No SCN Coding) to activate Hidden functions.

4. Support CANFD & DOIP

5. Support FCA (AutoAuth)

6. Support Guided Functions

7. Connect to the car via Bluetooth VCI

8. Two Years Free Update & Five Years Warranty & Lifetime Free Tech Support. After 2 years free update, it will not be used, you can still use old software.

9. 24 Kinds of Languages Support

10. Global Version is no IP limit

11. Support 100+ Car Brands Diagnosis

12. Compatible with BST360 battery tester and TSGUN now!

Note: This Tool supports ECU coding, but not ECU programming; supports anti-theft password, but not key programming; mainly for diagnosis and special functions

Note: The global version has no IP restrictions, the EU/UK version is limited to EU/UK IP usage.

What is new in CRP919X BT?

• New Wireless Connection: Equipped with BT Tech, softwares monthly release, support wireless and wired diagnostics.
• New CAN FD & DOIP: 5X Faster data transmission, supports newest vehicle protocols.
• New V.A.G Guided Functions: Provide maintenance guide to complete matching, calibration, and basic settings.
• New Autoauth for FCA SGW: No need 12+8 adapter just register an "AutoAuth" account on it.

Bluetooth Wireless Diagnostic Tool:

The CRP919X scan tool now includes Bluetooth and is called the CRP919XBT. With Bluetooth connectivity, you can quickly transfer diagnostic information at speeds of up to 3 Mbps, which is up to 10 times faster than the transfer speeds of other mechanic tools without Bluetooth. No more limitations by the cable length, and you are free to move around the vehicle portable VCI can easily fit inside your box. Illuminates blue/red/green when it's connected or charging.

LAUNCH X431 CRP919X BT Functions:

ECU Coding:

LAUNCH CRP919X BT has ECU Coding to make matching, calibration, relearning, personalization, and customization on ECU module components.
This is super great for mechanics to set up new auto parts, and customize vehicle builds as much as possible:

1. Offline Coding: Read the code from the original module, and then write the code to the new module, such as adaptation for Ford, for Mazda, etc. Offline Coding is available for Jaguar, Vauxhall, Opel, etc.

2. Refresh Hidden Functions: activate the hidden features or Disable car functions that you probably won't use, such as auto side mirrors folding function, automatic engine Start-Stop function, etc.

3. Recode the adaptive data: making sure the newly installed ECU modules will work in harmony with the rest of the system after repair.

4. Fix complex ECU-controlled issues: such as low fu^el efficiency, mysterious power loss, unknown fault in mechanical parts, etc.

5. Make the general model to be deluxe, and enhance the driving experience: make the moving pointer perform self-check, display the amount of fu^el consumption, activate a beep sound, one press to close all windows, flash all brake lights during emergency braking, make turn signal light & rear fog light alternatively flash, activate & deactivate daytime running lights, etc.

6. Disable car functions that you probably won't use.

Note:

(1) ECU Offline Coding is not universally compatible with all vehicles! Please provide us VIN number/year/model via sales002@vxdas.com to check compatibility first. 

(2) No ECU Programming. 

Bi-directional Control-Fast and Easy Car Subsystem Testing

CRP919XBT scan tool also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. Check the working status and functionality of open and close solenoids, energize injectors, turn the cooling fan on and off, and more, all from the device itself. With the CRP919XBT's bi-directional control feature, technicians can perform tests quickly and easily, potentially increasing their earnings.

Launch X431 CRP919X BT can do:

1. Operating bi-directional control (active test) easily without vehicle control.

2. Including various active tests: device acceleration, vehicle level position, windows, doors, sunroof, wipers, radiator fan, mirrors, sound horn, A/C compressor clutch relay, cooling fan, fu~el system, engine speed/throttle, etc.

3. Diagnostic efficiency: you don't need to spend a lot of time disassembling the entire door to find out why the window won't lift.

4. Covering American, Asian, and European mainstream vehicles.

5. Suiting for DIYers, home repair mechanics, technicians, repair garages, etc.

FCA Vehicle Autoauth Access

Autoauth for FCA SGW

Use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure. Applicable to FCA vehicles(Chrysler, Dodge, Jeep, Fiat) equipped with a security gateway module (SGW) in 2017 and later. (Note: There is an annual $50 fee for Autoauth account, but the payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process.)

Fit for FCA Vehicles from 2017-2024 including: 

300/Pacifica/Challenger/Charger/Durango/Journey/Ram 1000/Ram 1500(DS)/Ram 1500(DT)/Ram 2500/Ram 3500 Cab Chassis/Ram 3500 Cab Chassis 10K/Ram 3500 Pickup/Ram 4500/Ram 5500/ProMaster City/Cherokee/Compass/Compass (Brazil, China, India, Mexico)/Grand Commander/Renegade/Wrangler (JL)/ Giulia/ Giulietta/ Stelvio/ 500X/500X/500BEV/Toro/Doblo/Ducato/Novo Strada/Mobi/... More keeps growing

31+ OE-Level Maintenance Functions:

1. ABS Bleeding

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

2. TPMS Reset

When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

3. Oil Lamp Reset

Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.

4. Electronic Throttle Sensor Reset

To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.

5. Injector Coding

After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

6. SAS Reset

It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.

7. Brake-pad Reset

To deactivate and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.

8. Gear Learning

Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

9. IMMO Service

To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

10. Battery Matching

Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.

11. DPF Regeneration

It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.

12. EGR Adaption

This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.

13. Suspension Matching

When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.

14. NOx Sensor Reset

If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

15. Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.

16. Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory.

17. Stop-start Reset

This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)

18. AC Initialization

AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.

19. AdBlue Reset

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.

20. AFS Headlamp Reset

This function enables you to initialize the adaptive headlamp system.

21. A/F Reset

This function is applied to set or learn air/fuel rate parameters.

22. Gearbox Reset

This function enables you to complete the gearbox self-learning to improve gear shifting quality

23. Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

24. Transport Reset

To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.

25. Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

26. High Voltage Battery Detection

This function is used for high voltage battery diagnosis and status information detection.

27. Sunroof Initialization

This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.

28. Engine Power Balance Monitoring

This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.

29. Language Change

This function is used to change system language of vehicle center console.note:you need to have language pack to do language change

Language support: English, French, Spanish, German, Italy, Russia, Portuguese, Japanese, Korean and Polish

30. Gas Particulate Filter (GPF) Regeneration

This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.

31. Intelligent Cruise Control System Reset

This function is used to match the intelligent cruise control module after it is replaced or repaired.

(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)

New CAN FD & DoIP Protocol Supporting

CANFD&DOIP Protocols: The application of new protocols CAN FD/DOIP boosts 6x faster vehicle communication between modules, gets much higher data rates & faster diagnostic speed than ever.

• CANFD Protocol: 

CAN with flexible data rate (CAN FD) overcomes the limitations of the classical CAN bus in terms of data transfer rate. With an advanced CRC algorithm and much wider compatibility, it will accommodate more data, run faster, improve communication speed, and reduce the risk of missed.

Fit for GM Vehicles from 2020-2024 including:

Onix/Tracker/Cavalier/Encore/Suburban/Escalade/Tahoe/Yukon/Grand Cherokee/ Montana/Silverado/Sierra/... keeps growing

• DOIP Protocol (Need Purchase extra DOIP Connector):

The DoIP diagnostic function enables the use of diagnostics introduced via UDS on TCP/IP and Ethernet. This allows the LAUNCH CRP919EBT to save time and money when performing complex diagnostic tasks and flash memory applications.

Fit for B-MW F&G chassis, Vo-lvo models 2018 and later, Land Rover & Jaguar models 2017 and later, more keeps growing.

OE-Level All System Diagnostics Tool

Extra Full OBD2 Functions

It supports OBD ll functions to help you turn off the annoying instrument fault indicator and also can read/clear codes, O2 sensor test, I/M readiness, On-board monitor test, read data stream, display freeze frame data, EVAP system test, retrieve vehicle information (VIN, calibration ID, calibration verification numbers)

Powerful Bidirectional Control (Active Tests)

Bi-directional control is a feature that allows for two-way communication and control between scanner and car systems. It enables drive solenoids and actuators for active testing, sending commands to the system/component to test its operating status without using the vehicle controls. By utilizing Bi-Directional Control, technicians, mechanicians, car dealer, auto repair shop, DIYer or individual owner can actively monitor and control the behavior of a system, let you quickly understand whether a specific system, component, or subsystem is operating normally. It provides a more comprehensive and interactive approach to testing and troubleshooting, allowing for efficient identification and resolution of issues, pinpoint issues and greatly improve diagnostic efficiency.

Frequently-used Active Tests including: Evap Tests/ Purge Solenoid/ Fuel Injector Test/ Cycling A/C Clutch Relay/ Cycling Abs Motor Pump/ Cooling Fan Test/ Headlamp Test/ Sunroof/ Operate Mirrors/ Turn On The Sound Horn/ Turn On The Radiator Fan/ Open/Close Windows/ Turn On/Off The Lights/ Test Door Lock Actuators/ A/C Compressor Activation/ Modulate The Throttle/ Compression Test/ Turn On/Off Front And Rear Side Acm Solenoid/ Turn The Fuel Pump On And Off/ Cycling The A/C/ Clutch On And Off/ Left Clutch Electromagnetic Coil Test/ Acceleration Device Test/ Oil Pressure Control Test/ Dynamic Camera Aiming/ Vehicle Level Position Calibration/ Brake Vacuum Pump/ Inlet And Outlet Valve Tests/ Open Brakes Tests/ Parking Brake Botors/ Wheel Speed Sensor Supply/...

Health Report & Feedback

Launch CRP919XBT can automatically generate health reports via One-Click, the scanner will carry out in-depth inspections and calibrations for your vehicles, and you can send share, print via email, or local save the report in scanner.
LAUNCH CRP919XBT allows you to submit online feedback of your diagnostic problems to LAUNCH for analysis and troubleshooting. You can submit the detailed failure description to get valuable solutions.

8-in-1 Live Data Stream

Our Launch CRP919XBT can combine 8 graph in a page which will allows you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, long/short fuel trim, engine rpm, etc. And You’ll easily focus on any symtom-specific or suspicious data parameters, the automotive diagnostic scanner allows maximum of 4 live data streams to be merged in one graph, Launch CRP919X BT also supports exporting data as CSV file, which can and save for a long time and share to pc, helping you further check potential problems of the vehicle.

Auto VIN & Auto Scan

Launch CRP919X BT bidirectional scan tool adopts the latest VIN-based Auto VIN Technology that enables auto technicians or home mechanics to identify vehicle information at a single touch, like Brand, Year, Make, Model, etc. With the Auto VIN and Auto Scan feature combined, CRP919XBT can perform comprehensive diagnostics accurately and efficiently. Note: Auto VIN function can NOT work on all cars. You can always navigate your vehicle through the menu manually to perform diagnostics and services.

Launch X431 CRP919X BT Vehicle Brands Coverage:

 150 + Brands Coverage: Covers 150+ Car Makers and 10000+ Vehicles in American, European, & Asian etc brands from 1996-2024. (Including 12V cars, light duty trucks, SUVs, minivans.)

• US Models: For FORD, For LINCOIN, For G-M, For BUICK, For CADILLAC, For CHEVROLET, For CHRYSLER, For DODGE,For JEEP, etc.
• EUR Models: For B-ENZ,For B-MW, For V-W, For SKODA, For A-UDI, For OPEL, For LAMBORGHINI, For POR-SCHE, For MAYBACH, For EURO FORD, For LANDROVER, For BENTLEY, For ROVER, For FERRARI,For FIAT, For RENAULT, For SAAB, For VO-LVO, etc.
• ASIA Models: For ACURA, For DAEWOO, For HOLDEN, For HONDA, For HYUNDAI, For INFINIT, For ISUZU, For KIA, For LEXUS, For MAZDA, For MITSUBISHI, For NISSAN, For SUBARU, For SUZUKI, For TO-YOTA, For BYD, For CHERY, For TATA, For MARUTI, For MAHINDRA, etc.

Launch X431 CRP919X BT Packing List: