Lonsdor LKE Smart Key emulator for Toyota Lexus smart key all lost is desinged to work together with Lonsdor K518ISE “Special function” option, it is more powerfull than SKE emulators in 5 colors and easy to carry one single instead of 5 ones. For the SKE emulator user, you don’t need to worry it won’t work, it can work mornally.
Lonsdor LKE Smart Key Emulator = SKE-LT Smart Key Emulator 4pcs+ SKE-LT-DSTAES 128 Bit Smart Key Emulator 1pc = Lonsdor K518ISE SKE-IT Smart Key Emulator 5 in 1 Set
Lonsdor LKE Smart Key Emulator Features:
1. Lonsdor LKE Smart Key Emulator is a car key emulator newly released by Shenzhen Lonsdor Technology co.,ltd, as an ancillary product for K518 device.
2. Lonsdor LKE Smart Key Emulator supports functions such as collect data(sent from automobile ignition coil) to detect the coil fault and decode car keys; simulate key chip(4D and 46 chip are supported currently, more chip types to be continued).
3. It’s lightweight and convenient, and can match all the vehicle models with 4D or 46 chip by working with K518.
4. Meanwhile, LKE adopts low-power design, and has CR2032 button battery installed externally, which is easy to replace batteries and can avoid damage to casing.
How to use Lonsdor LKE?
Take 4D chip (DST80) reading for example, boot K518 device, click “Special function” icon and choose corresponding functions (such as Identify & copy chip, Analog chip, Decode chip, Ignition coil) and operate as per system prompts.
When it starts to work, signal light will go on; when at work, the light will flash
When finish work, the light will go out after 3 secs.
How to simulate key chip
Boot K518 device, place LKE into K518 card slot, go to “Special function” in the menu interface and choose “Analog chip->Generate analog chip” to generate 46 and 4D chip, then you can generate various car key chip according to demand, for example, 46 chip can be used to generate key chip for vehicle models like Great wall motor, Zotye auto, Geely and etc; 4D chip can be used to generate key chip for Toyota, Lexus, Subaru and etc.
How to collect data
This function is currently used to collect data to decode chip, and can copy original car chip data after chip is decoded. Boot K518 device, place LKE into the card slot, go to “Special function” in the menu interface and choose “Decode chip”, you can decode different types of chip.
How to detect ignition coil fault and chip type
Boot K518 device, place LKE into the card slot, go to “Special function” in the menu interface and choose “Ignition coil->Detect ignition coil ” to detect whether the coil is normal and identify chip type.
Lonsdor LKE emulator has many capabilities:
1. Features of Toyota/Lexus smart key all lost(5 emulators-in-1)
No need to dismantle
Can work without network connection
Localized computing
2. Generate chip
LKE can be used to work as an emergency key to program when no dedicated chip.
3. Copy chip
By collecting data to decode and copy chip, LKE currently supports some 46 and 4D chip copy.
4. Simulate and convert chip
UseLonsdor K518ISE[Generate chip] to make various chips, part of 4D/46 and SKE Toyota currently supported.
5. Decode chip
Decode 46 and 4D chips to obtain SK.
6. Identify ignition coil and key chip type(all key lost)
7. As K518 helper:
Achieve programming key without PIN for Hyundai and Kia
Achieve programming key without PIN for BYD
Achieve programming key without PIN for Porsche Cayman(2005-2010)and boxster.
Professional Diagnostic Solution & Service Supplier
Website：www.vxdas.com
Email: sales002@vxdas.com
What'sApp: +86 18566703079
Skype: xtuner888@hotmail.com
