How to Modify Laptop Sata Hard Disk Mode for Benz Xentry and ODIS HDD/SSD Software ?
Some customers buy MB Star Diagnostic Xentry software or ODIS software HDD may have this problems: when put our HDD/SSD software to the laptop, the laptop can't be turn on, always restart, and it appears blue screen. But changed to other HDD/SSD, it's OK. For this problem, the solution is Modify Sata Hard Disk Mode
The following is about How to Modify Laptop Sata Hard Disk Mode
Differant brand laptop press different Button.
Note:
- Recommended computer configuration: i5 CPU, 4G Ram, do not use the external hard drive to connect the USB cable
- ODIS HDD boot setting hard disk mode
- When you turn on the computer, the screen is blue.
Solution: Modify the hard disk mode
Step 1 Start your laptop first
Step 2 When the laptop started, press F12 untill the following interface appears (some laptop press ESC, F9 , please chech from the above laptop brand form)
Step 3 Select BIOS-Setup, the click "Enter" on your keyboard
Step 4 Use the up and down keys to move options. click Onboard Devices, then Select "SATA Operation"
Step 5 Switch left or right to select ATA or AHCI mode, here is choose AHCI mode
Step 6: Click "Yes" and "Apply" , in finial , click "End", the laptop would be restart.
Save & Exit Setup
Done !
How to change the disk mode to AHCI Video Instruction
After Sales Service
If there are any technical issues, first you can connect to the network and run Teamviewer.
www.vxdas.com
Email: sales002@vxdas.com
whatsapp: +86 18566703079
