How to Update Launch X431 CRP123 Creader Software?

Launch X431 CRP123 Creader is a new generation of car diagnostic product for professional and individual users released by LAUNCH.  The Launch X431 CRP123 main functions do not only include OBD / EOBD standard protocol diagnosis, but also cover professional diagnostic software for multiple models which can perform comprehensive diagnosis on four main ECU's (ENG\ABS\SRS\AT) of vehicle.

This article share by VXDAS Launch X431 Scanner Center

Any product purchase from VXDAS, just keep order number to contact us for Online Support:

Launch X431 CRP123 X Creader Powerful for Working:

Here is the step by step instruction on how to register and update Launch X431 CRP123 software.  The procedure can also be applied to Launch X431 Creader VIII CRP129 as well

How to Register & Update Launch X431 CRP123 Creader Step by Step: (Full Video In The Bottom)

Steps to Register Launch CRP123:

1. Go to the launch website, and click the CRP123, then click Update tools

2. Download and install the CRP123 or CRP129 update tool and launch the program when install

3. You will be prompted to type in the serial number (located on the back of the tool.

4. After the Serial # is entered select and enter the following information, click Submin

5. the register code cn be found by connecting the supplied USB cord to the crp12X and inserted in to the computer

6. When the tool has powered up, place curser on the help icon and press the OK button

7. Select tool information press OK

8. This is the register code number for inputting into step 4

9. Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU

10. REOPEN THE CRP update suite and select the updates you would like to perform or click select all and click Download.

11. Once all step are completed, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The toool will prompt you top upgrade, select OK button on tool to procced.

12. the registration process is now complete！

Update Launch CRP123

1. Visit Launch website : http://bit.ly/2W9K9Au and click update tool download

2. Download and install "Launch Creader Update Tool", after installation is complete, run it.

3. Select language(English, Chinese, French and Spanish are available) and input product serial number(the serial number is the back of creader VII+/creader VIII).

4. Click "Update" to enter the registration page, input Email and register code, click "Submit" Note: if you need register code, please refer to step 5 to step 8, if you already have register code, after subimit, skip to step 9)

5. The register code can be found in the creader VII+/Creader VIII. Connect one and of the USB cable to creader VII+/Creader VIII, and another end to the computer.

6. What until Launch creader enter the main menu, then move the mouse pointer to the "Help" icon, finaly press the OK button

7. Select "Tool Information", then press button"OK"

8. The register code shown below is the one needed to enter in thestep 4 (back to step 4 to input register code and continue)

9. Insert TF card into TF card reader, then insert the TF card into the computer

10. Restart the "Launch Update Tool", select the file you need click "all", then click "Download" to start the Download.

11. Aftrer complete download, take out TF card from TF card reader and inset it into the slot of creader VIII+/Creader VIII, then supply power for creader VII+/Creader VIII by the USB cable(One end of the USB cable connect to Creader VII+/creaderVIII and another end to the computer) or by the vehicle diagnostic socket(connect the OBDII connector of Creader VII+/Creader VIII to vehicle diagnostic socket), after the creader starts, it popup a window prompting" System Upgrate-Sure Upgrade?" Select "OK" to upgrate.

12. Update complete!

Check Launch X431 CRP123 Creader Update Full Video:

VXDAS Launch X431 diagnostic tool Center