When it comes to automotive diagnostics, having the right tools can make all the difference. Among the many options from Thinkcar Scanner, the Thinkcar ThinkDiag 2 Scanner stands out as a top choice for both professionals and enthusiasts. This powerful device offers comprehensive features that cater to various diagnostic needs, making it one of the best Thinkcar scanners on the market.
In this blog, we will show you the full reveiew of the Thinkcar Scanner ThinkDiag 2.
Thinkdiag 2 is an advanced Bluetooth OBD2 scanner with every function needed to diagnose car problems. It also does advanced service functions and ecu coding, and it does it for a wide car brand range. Here comes a detailed review of the thinkdiag2.
Download
Thinkcar Thinkdiag scanner Supply the APP for you to download and then you need to login the account. The App works well overall. Doesn't take too long to load. Registration and signing into the app was simple.
How to use:
Step 1: Download Thinkdiag/Thinkdiag+ APP
After installation, input your Email address and password to register an account for the first use, and then login with the registered account.
Step 2: Activate THINKDIAG2
Click on any diagnostic function in the Thinkdiag+/Thinkdiag APP
When the activation page appears, click on the “Activate” button, and input the serial number (on the back of Thinkdiag 2 OBD2 scanner) and 8-digit activation code (on the white sticker in the manual book) to activate.
Step 3: Insert the THINKDIAG 2 OBD2 scanner into vehicle’s OBDII port
After inserting, the device is power on if the light turns green.
There are 5 common locations for OBDII port. (See the marks in the figure below)
Step 4: Connect Thinkdiag/Thinkdiag+ APP and device via Bluetooth
Open the Thinkdiag/ThinkDiag+ APP and it will automatically connect with the Bluetooth in the Thinkdiag2 scanner during the diagnostic process.
Step 5: Download diagnostic software automatically
THINKDIAG2 will automatically download the corresponding software for your vehicle during the diagnostics for the first time. No need to download the software again in the future.
Step 6: Perform the functions supported
You can perform all system diagnosis, OBD functions, maintenance functions, etc by clicking on the corresponding option on the home page.
For example, click “ALL SYSTEMS DIAGNOSTIC” to access the all systems diagnosis DIAGNOSTIC function. After entering, you can read VIN information intelligently or choose your own vehicle brand to enter diagnosis.
Click “OBD Function” to enter the OBD function. You can read fault code, clear fault code, read data stream, freeze frame, O2 sensor test, ON-BOARD monitoring and EVAP system.
Thinkcar Thinkdiag2 Software & Subscription
Thinkcar Thinkdiag2 scanner supports 1-year full software function use and update.
One of the standout features of Thinkdiag 2 is its commitment to regular software updates, which ensure that the scanner remains compatible with the latest vehicle models and technologies. These updates are crucial for maintaining the tool's effectiveness across a broad range of vehicles.
Comparison
Thinkdiag 2 vs Thinkdiag
Thinkdiag 2 vs Autel AP200
Thinkcar Thinkdiag2 scanner has so many other service functions like resetting ECU values etc.. overall an A+ device we had used Autel (Both AP200 and MD808) and it wasn't as well built and fast as this also they didn't have the key programming function for some cars (i.e Mitsubishi Mirage 2015) and lots of connectivity issues.
Thinkdiag 2 vs Topscan
This is a lot better than the TopDon TopScan as well it does more special functions such as Transmission learning and has a ton of active tests /bi directional controls. The graphing is also ahead of Topscan and allows you to change and look at graphs and 4-1 with recorded data and the TopScan won't allow you to do that and just plays a movie file back of the recording which is very limited. We would recommend this over TopScan because you get some much more functionality and the graphing is awesome. Plus it can do ECM Replace for Honda /Subaru and TopScan Doesn't do that. We also like it has a cord so you don't forget it in a car. It the scanner part fits in the door side holder nicely or on top of the steering wheel. We have the Topdon Topscan as well and this thing puts the TopScan to shame in features again such as special functions and the ability to replace ECM on certain models.
Pros:
- It will compete with Launch X431 scanner which is around $1000
- Cheap, can do almost as much as the x431 for a fraction of the price
- This tool is CAN FD compatible as well as FCA Chrysler & Autoauth for secure gateway access.
- A very nice and good quality tool that is very simple to use.
- It has full bi-directional control
- Full live data with graphs, combining and recording
- Full scan (very fast)
- Wide vehicle coveragenice ECU coding
Cons:
- The 4 in 1 graph or combine does not work with IOS or iPhones at all and is major feature.This means no plotting 4 wheel speed sensors at once for iPhone but for Android it works.
- Thinkdiag2 only supports 1-year full software function use and update, after 1-year, you will lose all functionality once subscription expires.
- The maintenance functions work only on very few models.
- Make sure the device your are using it on has ample storage because it can take up quite a lot of space.
- You might be challenging to get bifuctional operations for some older Japanese and Singapore vehicles. Make sure the device your are using it on has ample storage because it can take up quite a lot of space.
Thinkcar thinkdiag 2 is the Best Thinkcar scanner for DIY or a seasoned pro. Want to purchase>>>
Any other question about Thinkcar scanner or thinkcar thinkdiag 2, feel free to contact us>>>
