Xhorse VVDI MB BGA Tool Technical Service<
V5.0.2 software download link
Password:123456
FAQ
A: Now support all key lost: w204, w207,W166, W246, W212, W212(old), some W216, W164 2009-
Q: I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
A: Read eis via obd for W164, W169, W211, W209, require gateway connected
Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
A: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success
by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.
Q: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?
A: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success
Q: First time today it took much longer than 8 hours to Unlock NEC.
Now I cannot personalize this ESL back because it is just not calculating key password. I have working key but it keeps failing to Calculate password. I have done about 6 or 7 times already.
Is there some problem in this V2.1.7? Or is the server having issues?
A:
All sorted out. All done by VVDI but it took so many times to calculate password. Had to do aqcuisition maybe 8 times or so. The NEC is also unlocked. Then wrote ESL and personalised and ll is working fine. Customer will take it over the weekend to fit as the car is more than 500km away.
If they can see why recently is the VVDI suffering with password calculation on W204.
solution :about 8 times online calculation, the point is data acquisition, each time if acquisition without valid data means need one more time again.
Q: Could anyone help me with bench test for w906? I can't find cable for this model.
A:no need buy any cables for working via IR connect just 4 wires for working OBD need connect parallel any diagnostic to CAN and open EZS for testing connect emulator or ELV.
Q: Use VVDI MB read S221 ISM Password successfully, but after click renew ISM,it shows "ISM-164 270 03 52(Siemens,VDO)"
A:For Renw ISM ECU function support list is much less,if after several time still failed, it may not support at present, please except future update. Thanks.
Q: What is the password of VVDI MB Tool?after i download it,extract it,it asks for password.
A:The password is:123456.Same like VVDI Prog,VVDI2.
Q: VVDI MB Tool standard version incudes tokens or not?
A:VVDI MB Tool does not includes the tokens.If you have condor xc-mini or condor xc-007,bind them together you can get one token free everyday.Or you need to purchase extra tokens.
Q: Can i use MBE Engineering to program Xhorse Emulator?
A: NO,use VVDI MB to program xhorse Emulator.
Q: How to connect VVDI MB Tool for writing diagram function?can i use VVDI MB Tool to copy old ecu data to new ecu?
A: If it supports the function,it will show detailed steps.
Q: How to use VVDI Benz to read data?
A: Usually,it can be read by OBD way.Sometimes,needs to read from EIS.
Q: Can i use VVDI MB TOOL to renew BGA keys?How can i get the key password?
A: You can get the password from EIS data and key data calculate online.But BGA key does not support renew at present.
Q: Will it support 2016 FBS3 keys?
A: No,it can not support at present.
Q: How can i get the erase password for EIS?
A: It the EIS support renew,it will show the erase password.
Q: From the manual,it shows:Support renew EIS, make 2nd hand EIS to new one (online).What is the online meaning?
A: It means you need to use VVDI MB Tool with internet.
Q: When i try to use password calculation to get key password,but it shows "pay for password culculation before update",how can i do?
A: For password calculation function need tokens,if you do not have free tokens,you need to buy VVDI MB Tool Password Tokens.
Q: How many Password Calculation Token will be used everytime?One time one token?
A: If all key lost,will need 2 tokens.Sometimes,the key is different,the token times may be different.
Q: When i try to use VVDI MB,but it shows Cannot connect to server,connection with the server could not be established,how to solve it?
A: Vvdi Mb Bga tool Server Update which happened 11:00 PM China time, server was updated successfully all OK.Please try later.Thanks.
Q: Will VVDI mb bga tool renew Mercedes 7G gearbox 7G TCU 722.8?
A: Yes. VVDI MB can renew MB 7G transmission.
Q: Today i had W210 2001 for key.Owner had one working key.VVDI MB tool try to read via IR and OBD password on car,unsuccesfull.
Tried to read via IR and OBD on desk unsuccesfull.
A: Remove 705 mcu on ETL and generate keys NoImmo online all ok.
Q: How to use VVDI MB BGA Tool to Read Write Key?
A: Read Write Key support read key basic information, write key file, renew/write NEC key
(Support Keyless Go). BE keys can read password directly via IR, renew BE key, write new key file to BE key
NEC adaptor support v51, v57 key password
1. IR mode
Identification key:Support read key basic information: SSID, counter, remain times, usetimes, key number, status, version, mark values etc
BE key: Key version is BE,support read password and key eeprom stored in BE key,write new key file to make a working key, renew used BE key to new one etc
If working key is BE version, you can read password from key directly, no need read password from EIS
NEC&BGA Keys: Write key file to new original keys or erased keys via IR
Write mark values: Only BE key support, you can write information for yourself
Copy key password: You can copy the password to clipboard after success read key password
Repair key via IR: When identification key, you can only get SSID, Status, Version, then you can repair this key via IR
2. NEC Adaptor mode
For NEC v51, v57 version, support read password from working key directly, no need read password from EIS
For all NEC types, you must use “Identification key” to read one time before renew/write key2.
Q: How to place key NEC chip to adaptor via read/write/renew key via NEC adaptor
