BM-W FEM & BDC Functions Authorization Service for VVDI2 With Ikeycutter Condor
BM-W FEM & BDC Functions Authorization Service for VVDI2 With Ikeycutter Condor
This BM-W FEM/BDC Authorization for VVDI2 is only for those VVDI2 already bind to Condor XC MINI. Your vvdi2 must already has BM-W OBD function before to get this BM-W FEM/BDC Authorization service.
BM-W FEM/BDC Authorization for VVDI2 with Ikeycutter Condor
This authorization only for those VVDI2 already bind to Condor XC-MINI/XC-007 key cutting machine
Pls note:
1.Your vvdi2 must already has BM-W OBD function
2.No real shipping. After payment, pls give us serial number of VVDI2 and Condor XC MINI
VVDI2 - BM-W FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BM-W E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BM-W
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BM-W E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay kep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
This BM-W FEM/BDC Authorization for VVDI2 is only for those VVDI2 already bind to Condor XC MINI. Your vvdi2 must already has BM-W OBD function before to get this BM-W FEM/BDC Authorization service.
BM-W FEM/BDC Authorization for VVDI2 with Ikeycutter Condor
This authorization only for those VVDI2 already bind to Condor XC-MINI/XC-007 key cutting machine
Pls note:
1.Your vvdi2 must already has BM-W OBD function
2.No real shipping. After payment, pls give us serial number of VVDI2 and Condor XC MINI
VVDI2 - BM-W FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BM-W E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BM-W
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BM-W E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay kep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
