MultiFlasher ECU Chip Tuning Software Multi Flasher for Hyundai Kia Supports J2534 OpenPort 2.0 MultiFlasher ECU Chip Tuning Software Multi Flasher for Hyundai Kia Supports J2534 OpenPort 2.0

ED182
0.5kg
ECU Chip Tuning
$269.00 $219.00 19%
-
+

Multiflasher Multi Flasher is professional ECU programmer & Gearbox Power Upgrade Tool for Hyundai/kia via OBD, read and write FLASH and EEPROM memory of ECUs, support checksums.

MultiFlasher is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

 

List of modules and their functions:

Bosch M(G)7.9.8. Only FLASH memory writing through the OBDII.
Vehicles: KIA/Hyundai i10, i20, i30, Accent (Verna), Elantra, Pikanto, Rio, Ceed, Cerato, Soul, etc with 1.4L, 1.6L engines and a mechanical accelerator pedal.

 

Siemens SIMK-31/41/43, SIM2K-47. FLASH memory reading and writing through the OBDII. Vehicles: KIA/Hyundai Coupe, Elantra, SantaFe, Sonata, Tiburon, Tucson, Ceed, Cerato, Sportage, etc with 2.0L and 2.7L engines.

 

The set of modules: Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII.
Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines.

 

Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format.
Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

 

BSL TriCore. Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode.
The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo).

 

Special functions:

- checksum and BOSCH digital signature verification/recalculation, Siemens/Continental SIM2K 240-245 checksum verification/recalculation;

- protection passwords reading: BOSCH TPROT 8-10 VAG, TPROT 11-13 KIA/Hyundai, TPROT 12 M(E)17.9.71 ВАЗ/УАЗ, GPT (a special adapter is needed) и Siemens/Continental SID208 Ford, EMS2204 Ford, SIM2K-24x KIA/Hyundai/SsangYong/Chevrolet;

- BOSCH and Siemens/Continental SIM2K 240-245 maps import;

- protection disabling in BOSCH M(E)17.9.71 VAZ/UAZ.

  • Bosch M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII.;
  • Set of modules M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII. Special functions: IMMO OFF without opening the ECU. Only ME17.9.7 VAZ!!! Bosch M(E)17.9.71 VAZ/UAZ OBD. For flashing factory files in any ECUs, and tuned files to ECUs with disabled protection (in BSL mode). Special feature - ECU protection state definition;
  • EDC17C08/CP14 KIA/Hyundai. Only FLASH memory writing through the OBDII. Vehicles: KIA/Hyundai Ceed 1.6 CRDI, IX35 2.0 CRDI, SantaFe 2.2 CRDI, Sorento 2.2 D, Soul 1.6 D, Sportage 1.7 CRDI / 2.0 CRDI, etc.;
  • Bosch ME 17.9.11/12/13. FLASH memory reading and flashing with factory and tuned files through the OBDII. Supports GDS format. Vehicles: KIA/Hyundai with 1.4L, 1.6L engines and an electronic accelerator pedal;
  • Bosch M(E) 7.9.7(+). Only FLASH memory writing of M7.9.7, M7.9.7+ and ME7.9.7 controllers installed in Korean and Chinese vehicles through the OBDII, and in Russian vehicles through the ECU connector. Supports SMS-Software compressed format. ME7.9.71 support will be available soon.
  • Siemens EMS2204. Only writing FLASH memory writing with factory and tuned files through the OBDII. Supports VBF format. For Ford Focus III with a 1.6L engine.
  • Delphi DCM 3.7 SsangYong. FLASH memory reading and writing through the OBDII, all checksums verification, checksum verification and correction for maps area.

Multiflasher Multi Flasher ECU programmer Software Display_1

Multiflasher Multi Flasher ECU programmer Software Display_2

 

Before flashing and after reading the program checks the firmware and checksums structure, and recalculates them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

 

Adapter settings selection

Adapter settings selection

 

Errors reading and reset:

All the modules function through OpenPort 2.0 ;or any other J2534 device, including K-line protocol. There is no need for additional adapters.

 

Package List:

1pc x Software

1pc x USB-dongle.

 

MultiFlasher Chip Tuning Software Update Log:

Multiflasher v3.11 :

- Module Bosch EDC17C08/CP14 KIA/Hyundai: improved identification of opened files;

- ID reading update, 10SW005072 is now supported;

- improved connection in all diagnostic modules using CAN-bus. The connection is two times faster now depending on the adapter!

Multiflasher v2.26:

- the function of switching off the protection of the control unit Bosch M (E) has been added to the BSL TriCore module 17.9.71

- the documentation for the module adds a description of new features

- new module Bosch M (E) 17.9.71 VAZ / UAZ OBD. To record factory firmware in any computer, and tuning, in the ECU with disabled (in BSL mode) protection. A special function of the module is to determine the state of protection in the computer.


Multiflasher v2.25:

- TC1793 processor support added to the BSL TriCore module

- the documentation for the module is supplemented with information on Continental / Siemens SIM2K-240

- in the documentation for the module, the connection description of EDC17C57

- for non-Russian users of the bootloader, messages from the BSL TriCore module are translated into English.

Multiflasher v2.24:

- BSL TriCore module adds the ability to import calibrations of the Bosch and Continental / Siemens control units SIM2K-240 - 245

- the recognition of new software for Continental / Siemens SIM2K-243 is added to BSL TriCore module

- Opel keys added to BSL TriCore module

- Continental / Siemens SIM2K-240 information added to the documentation for the module

Multiflasher v2.23:

- Added Volkswagen keys
to the module of the BSL TriCore - the recognition, the display of the IDs, the checking / checking of the checksums of the Continental / Siemens control module SIM2K-240 - 245 have been added to the BSL TriCore module. The documentation for the module has been added

Multiflasher v2.22:

- the TC1728 processor support has been added to the BSL TriCore module

- the documentation for the module has been added - the error of reading the identifiers was corrected, after using the module BSL TriCore

Multiflasher v2.21:

- the function of reading the password of the BOSCH M (E) 17.9.71 (UAZ) blocks has been added to the BSL TriCore module - the support for the TC1724 processor has been added to the module BSL TriCore

- the documentation for the module has been added.

Multiflasher Multi Flasher is professional ECU programmer & Gearbox Power Upgrade Tool for Hyundai/kia via OBD, read and write FLASH and EEPROM memory of ECUs, support checksums.

MultiFlasher is a chip-tuning software intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

 

List of modules and their functions:

Bosch M(G)7.9.8. Only FLASH memory writing through the OBDII.
Vehicles: KIA/Hyundai i10, i20, i30, Accent (Verna), Elantra, Pikanto, Rio, Ceed, Cerato, Soul, etc with 1.4L, 1.6L engines and a mechanical accelerator pedal.

 

Siemens SIMK-31/41/43, SIM2K-47. FLASH memory reading and writing through the OBDII. Vehicles: KIA/Hyundai Coupe, Elantra, SantaFe, Sonata, Tiburon, Tucson, Ceed, Cerato, Sportage, etc with 2.0L and 2.7L engines.

 

The set of modules: Siemens SIM2K-140/141/142/341/D160. FLASH memory reading through ECU connector and flashing through the OBDII.
Vehicles: KIA/Hyundai Carens, Cerato new, Magentis, Sonata, Sorento, Sportage new, ix35, etc with 2.0L and 2.4L engines, and Chevrolet Epica with 2.0L and 2.5L engines.

 

Siemens SIM2K-241/242/245/С201. Reading and flashing through the OBDII diagnostic link connector. Supports GDS format.
Vehicles: Elantra MD 1.8, Sonata new, i40 2.0, ix35 new, Ceed new, Cerato new, Optima new, etc., SsangYong Actyon 2.0, Korando.

 

BSL TriCore. Reading and flashing of ECU internal and external FLASH/EEPROM memory with Infineon TriCore TC1724, TC1728, TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796, TC1797 processors in BSL mode.
The approximate short list of supported ECUs BOSCH M(E)17.9.7 (VAZ/UAZ), and ME17, ME (D, G)17, EDC17 (AMG, Audi, BMW, Citroen, Honda, Hyundai, KIA, Land Rover, Mercedes, Mini, Peugeot, Porsche, Renault, Saab, Skoda, Toyota, Volkswagen, Volvo).

 

Special functions:

- checksum and BOSCH digital signature verification/recalculation, Siemens/Continental SIM2K 240-245 checksum verification/recalculation;

- protection passwords reading: BOSCH TPROT 8-10 VAG, TPROT 11-13 KIA/Hyundai, TPROT 12 M(E)17.9.71 ВАЗ/УАЗ, GPT (a special adapter is needed) и Siemens/Continental SID208 Ford, EMS2204 Ford, SIM2K-24x KIA/Hyundai/SsangYong/Chevrolet;

- BOSCH and Siemens/Continental SIM2K 240-245 maps import;

- protection disabling in BOSCH M(E)17.9.71 VAZ/UAZ.

  • Bosch M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII.;
  • Set of modules M(E)17.9.7. Only ECUs FLASH memory writing of VAZ/UAZ vehicles through the OBDII. Special functions: IMMO OFF without opening the ECU. Only ME17.9.7 VAZ!!! Bosch M(E)17.9.71 VAZ/UAZ OBD. For flashing factory files in any ECUs, and tuned files to ECUs with disabled protection (in BSL mode). Special feature - ECU protection state definition;
  • EDC17C08/CP14 KIA/Hyundai. Only FLASH memory writing through the OBDII. Vehicles: KIA/Hyundai Ceed 1.6 CRDI, IX35 2.0 CRDI, SantaFe 2.2 CRDI, Sorento 2.2 D, Soul 1.6 D, Sportage 1.7 CRDI / 2.0 CRDI, etc.;
  • Bosch ME 17.9.11/12/13. FLASH memory reading and flashing with factory and tuned files through the OBDII. Supports GDS format. Vehicles: KIA/Hyundai with 1.4L, 1.6L engines and an electronic accelerator pedal;
  • Bosch M(E) 7.9.7(+). Only FLASH memory writing of M7.9.7, M7.9.7+ and ME7.9.7 controllers installed in Korean and Chinese vehicles through the OBDII, and in Russian vehicles through the ECU connector. Supports SMS-Software compressed format. ME7.9.71 support will be available soon.
  • Siemens EMS2204. Only writing FLASH memory writing with factory and tuned files through the OBDII. Supports VBF format. For Ford Focus III with a 1.6L engine.
  • Delphi DCM 3.7 SsangYong. FLASH memory reading and writing through the OBDII, all checksums verification, checksum verification and correction for maps area.

Multiflasher Multi Flasher ECU programmer Software Display_1

Multiflasher Multi Flasher ECU programmer Software Display_2

 

Before flashing and after reading the program checks the firmware and checksums structure, and recalculates them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

 

Adapter settings selection

Adapter settings selection

 

Errors reading and reset:

All the modules function through OpenPort 2.0 ;or any other J2534 device, including K-line protocol. There is no need for additional adapters.

 

Package List:

1pc x Software

1pc x USB-dongle.

 

MultiFlasher Chip Tuning Software Update Log:

Multiflasher v3.11 :

- Module Bosch EDC17C08/CP14 KIA/Hyundai: improved identification of opened files;

- ID reading update, 10SW005072 is now supported;

- improved connection in all diagnostic modules using CAN-bus. The connection is two times faster now depending on the adapter!

Multiflasher v2.26:

- the function of switching off the protection of the control unit Bosch M (E) has been added to the BSL TriCore module 17.9.71

- the documentation for the module adds a description of new features

- new module Bosch M (E) 17.9.71 VAZ / UAZ OBD. To record factory firmware in any computer, and tuning, in the ECU with disabled (in BSL mode) protection. A special function of the module is to determine the state of protection in the computer.


Multiflasher v2.25:

- TC1793 processor support added to the BSL TriCore module

- the documentation for the module is supplemented with information on Continental / Siemens SIM2K-240

- in the documentation for the module, the connection description of EDC17C57

- for non-Russian users of the bootloader, messages from the BSL TriCore module are translated into English.

Multiflasher v2.24:

- BSL TriCore module adds the ability to import calibrations of the Bosch and Continental / Siemens control units SIM2K-240 - 245

- the recognition of new software for Continental / Siemens SIM2K-243 is added to BSL TriCore module

- Opel keys added to BSL TriCore module

- Continental / Siemens SIM2K-240 information added to the documentation for the module

Multiflasher v2.23:

- Added Volkswagen keys
to the module of the BSL TriCore - the recognition, the display of the IDs, the checking / checking of the checksums of the Continental / Siemens control module SIM2K-240 - 245 have been added to the BSL TriCore module. The documentation for the module has been added

Multiflasher v2.22:

- the TC1728 processor support has been added to the BSL TriCore module

- the documentation for the module has been added - the error of reading the identifiers was corrected, after using the module BSL TriCore

Multiflasher v2.21:

- the function of reading the password of the BOSCH M (E) 17.9.71 (UAZ) blocks has been added to the BSL TriCore module - the support for the TC1724 processor has been added to the module BSL TriCore

- the documentation for the module has been added.

VXDAS Policy

1.Return Policy

2.Refund Policy

3.Returning for replacement

4.Our product guarantee

5.Repair Policy

Before returning items to us, please read and follow the instructions below. You can also contact our Customer Service, we will be glad to help you.

Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.


Return Policy

Mis-Ordered Products: If you order wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this.

Quality Issue: our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our return policy will be open for you.

Non Quality Issues: In some particular situation, our return policy can be open for you after our customer service learning your particular problem, and in this condition we will charge you 10% handling fee.

Shipping options for return items: when you confirm to return the items to us, please use simple airmail or EMS to return it, and write shipping address our customer service provides. Please do not use DHL, UPS, FEDEX and TNT or any other courier, because we can not get your return item, we will not responsible for that.


Refund policy

After we get your item return to us and check the item in good condition, we will issue you refund according to our policy within 2 working days through PayPal, please check your PayPal account timely or contact our customer service, and we we will  charge you 10% handling fee.

If you have any doubt, please check with our customer service.


Returning for replacement

When exchange for free: If your products encounter crash in delivery, we will exchange it for free for you and you undertake the shipping cost for your ship item back to us through simple airmail.

Mis-ordered products: If you order a wrong item and plan to exchange for you want, then just contact our customer service for help,if we can exchange for you, you need to pay the shipping cost to us as well as return to you.

Physical Damaged Items: If the item is damaged by yourself, we can not provide exchange service for you. But you can return for repair.

What you do before returning for replacement: you need contact our customer service to tell us your problem. What's wrong with your item and what you want us to do for you.

Returning shipping options: after confirming your items is under our policy of returning, we please you use simple airmail to ship item back to us. NO DHL, UPS, TNT, Fedex or any other express.

How we will do after receiving your return: you need keep touch with us to make sure we get it. After checking the item, we will arrange a replacement for you and we will inform you when everything is done. Please remember to check your email from time to time.


Our product guarantee

1 Year Warranty: the guarantee of our most products is one year. 

Before shipping out, all goods have been double verified by vxdas.com. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard.  After finish quality check,our QC stuff will carefully do quality check and paste our own QC label in the form of month/date/year on every product.

If you have any using problem of the products which buy from vxdas.com, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee.


Repair Policy

When your product get damaged after using some time and need repair, we provide repair service for you. Please contact with vxdas.com customer service about the repair.

You need use simple airmail to send the item back to us, after we fix it, we will send back to you. We will not charge you for simple airmail ship back, but if you ask for express shipping, you need to pay for this.


Any other questions, please feel free to contact vxdas.com customers service.

 

VXDAS Policy

1.Return Policy

2.Refund Policy

3.Returning for replacement

4.Our product guarantee

5.Repair Policy

Before returning items to us, please read and follow the instructions below. You can also contact our Customer Service, we will be glad to help you.

Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.


Return Policy

Mis-Ordered Products: If you order wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this.

Quality Issue: our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our return policy will be open for you.

Non Quality Issues: In some particular situation, our return policy can be open for you after our customer service learning your particular problem, and in this condition we will charge you 10% handling fee.

Shipping options for return items: when you confirm to return the items to us, please use simple airmail or EMS to return it, and write shipping address our customer service provides. Please do not use DHL, UPS, FEDEX and TNT or any other courier, because we can not get your return item, we will not responsible for that.


Refund policy

After we get your item return to us and check the item in good condition, we will issue you refund according to our policy within 2 working days through PayPal, please check your PayPal account timely or contact our customer service, and we we will  charge you 10% handling fee.

If you have any doubt, please check with our customer service.


Returning for replacement

When exchange for free: If your products encounter crash in delivery, we will exchange it for free for you and you undertake the shipping cost for your ship item back to us through simple airmail.

Mis-ordered products: If you order a wrong item and plan to exchange for you want, then just contact our customer service for help,if we can exchange for you, you need to pay the shipping cost to us as well as return to you.

Physical Damaged Items: If the item is damaged by yourself, we can not provide exchange service for you. But you can return for repair.

What you do before returning for replacement: you need contact our customer service to tell us your problem. What's wrong with your item and what you want us to do for you.

Returning shipping options: after confirming your items is under our policy of returning, we please you use simple airmail to ship item back to us. NO DHL, UPS, TNT, Fedex or any other express.

How we will do after receiving your return: you need keep touch with us to make sure we get it. After checking the item, we will arrange a replacement for you and we will inform you when everything is done. Please remember to check your email from time to time.


Our product guarantee

1 Year Warranty: the guarantee of our most products is one year. 

Before shipping out, all goods have been double verified by vxdas.com. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard.  After finish quality check,our QC stuff will carefully do quality check and paste our own QC label in the form of month/date/year on every product.

If you have any using problem of the products which buy from vxdas.com, please feedback to us first, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

Lost Products: If products get lost in delivery, or you still do not get your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we want you communicate with us. Usually, we will provide tracking number and tracking link timely. If products get lost on the way and we get confirm from couriers, we will arrange redelivery for your products. If you want ship it through express, then you need to pay express shipping fee.


Repair Policy

When your product get damaged after using some time and need repair, we provide repair service for you. Please contact with vxdas.com customer service about the repair.

You need use simple airmail to send the item back to us, after we fix it, we will send back to you. We will not charge you for simple airmail ship back, but if you ask for express shipping, you need to pay for this.


Any other questions, please feel free to contact vxdas.com customers service.

 

Recently Viewed Products Recently Viewed Products