Foxwell NT909 scanner for car covers more powerful functions than NT809/NT809BT, like ECU Coding, Bidirectional Control, 30+ services, DoIP&CAN FD protocols, AutoAuth FCA SGW.

Foxwell NT909 advanced ECU Coding & V-A-G Guide - The Foxwell scanner is available to relearn, recode, match, personalize ECU components for BMW E&F Chassis cars, custom configuration and flash Hidden Function.

Foxwell NT909 can diagnose all vehicle systems with comprehensive coverage, from Body to Powertrain, for professional-grade repairs.

Foxwell NT909 scanner delivers faster and smarter diagnosis for workshops and technicians. Through hardware and software upgrades, technical staff can now approach problems with greater speed and accuracy, and produce comprehensive, professional reports.

Dealership-Grade All-In-One Diagnostic Solution

Foxwell NT909 automotive diagnostic scanner comes with complete capabilities for codes, live data, active tests, ECU information, adaptation, matching etc. With fast quad-core processor, Foxwell NT909 can access all electronic systems to perform OE-Level diagnostics and maintenance services with maximum convenience and efficiency.

Foxwell NT909 Coding And Programming

Foxwell NT909 Advanced Features--Bidirectional Test/Active Tests

Active Tests, also known as Actuator Tests, are bi-directional diagnostic tests on vehicle systems and component. The tests let you to use the scanner temporarily activate or control a vehicle system or component, and when you exit the test, the system/component returns to normal operation.

Active Test can be employed on headlamps, windscreen wipers, windows & doors, and sunroof such as
●Turn On The Radiator Fan
●Open/ Close Windows/ Door
●Operate Mirrors
●EVAP Test/ Fuel Pump/ Fuel Injector Test
●Cycling a/c
●Clutch On/Off
●Turn On/Off The Sound Horn
●Active Grille Shutter
●Fuel Heater On/Off
●Modulate The Throttle
●Turn On/Off The light
……
NOTE: All above are probably not available for some specific car models.

Foxwell NT909 Comprehensive 30+ Special Functions For Easy Troubleshooting

1.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion.

2.BRT
This allow for a replacement battery to be coded to the batteyr management system

3.A/F Adjust
This utility allows for the learnt Air Fuel Ratio to be re-initialized

4.Cluth Adaption
This function is to relearn the cutch engagement point in a (DTC) Dual Cluth Transmission.

5.CVT
This function is reset the adaptive shift

6.DPF Regeneration
This function is used to regularly clear Particulate Matter from the trap in combustion oxidation mode to stabilize trap performance.

7.EPB
allows you to perform the service and maintenance of brake systems

8.EVAP Test/Smog Test
The EVAP system monitor checks for fuel vapor leaks by performing either a pressure or vacuum test on the fuel system.

9.Gear learning
Crankshaft position sensor adaptive learning.

10.Headlamp
Allowing for adaptive headlights to be relearnt.

11.Injector
Allows an injector trim code to be read and coded to the ECM.

12.Language Change
This routine is to change langauge displayed in the instrucment display.

13.Oil Reset
Oil Light reset/oil waer index reset command, this function varies greatly between OEM and models.

14.Prime Fuel Pump
This command allows a pump to be run to bleed or prime a system during service or repair.

15.Replace Airbag Ecu Module

16.SAS
This function allows a steering angle reset to be performed.

17.Seat Match
This utility performs the re-initilization of the power seat adaptive memory

18.Tcmoil
This routine is used to clear the oil degradation and downgrade counter.

19.TPMS
This utility performs tyre pressure Management system service to be performed.

20.TPS
This fuction allow for an idle relearn to be performed.

21.Transmission Adaption
This command allows the adaptive shift points to be relearnt.

22.Turbo
The routine is required if the secondary turbo charger is repleased. This will learn the pffset values for the turbine shut-off value.

23.Windowsdoor
When replacing door glass and after battery replacement on certain year, make, model vehicles special steps need to be take in order to properly replace and reprogram the vehicle so the electric windows work properly , the door window glass position can be learned by executing this routine, which enables pinch protection and one touch up function.

Many more

Foxwell NT909 Support Languages

The device only can install 2 languages , one is English , the other one you can choose from the following :

Korea, Spanish, Portuguese, French,Swedish, English, Dutch, Japanese, Italian, German,Russian，Hungarian, Slovak, Greek, Chinese, Traditional Chinese

English is Default Language, if you need other language, please send me the SN Number when you receive it (please register account and activation the sn number first), I will help you change it.

Foxwell NT909 Outstanding Design And Configuration

👍8000mAh Lithium-polymer battery, work for nearly 15 hours continuous use on a single charge.
👍Top Quality Tablet, 8inch color scren, and 2GB+32GB memory, not only for work, and also entertainment.
👍Foxwell NT909 is good choice for Workshop and Car owner, it can help Workshop Improve your efficiency and professionalism, As a Car owner, you can solve your car problem fast, don't need to cost much in repair shop.
👍Wireless Printing Function Allows you print Diagnosis Reset ans Get Instand Feedback

Foxwell NT909 Pack List:

1*NT909 main unit
1*VCI dongle
1*USB cable for VCI
1*USB type C cable
1*USB charging adpater
1*User maunal