XTOOL A30 PRO is a full system diagnostic scanner that can quickly test every system models status,Brief of its capabilities in full systems diagnoses as follows:

• For Engine System

The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

• For Transmission System

It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.

• For ABS System

Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.

• For SRS Airbag System

SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status

• To diagnose Brake System

if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

• To diagnose Emission System

if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

• To diagnose Fuel system

if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

• To diagnose Transmission

if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car

• To diagnose Wiper System

If you observe chattering or streaking wiper.If the car is not regularly checked,the accident might happen because you can not see clearly.

And many more ....

2. Bi-Directional Control / Active Tests

XTOOL A30 PRO is a bi-directional control scan tool can send commands to the vehicle ECU to perform active tests to control various vehicle parts and subsystems to test their working status, like fuel pump, fuel injector, A/C Clutch, window, door, sunroof, etc, so as to pinpoint the fault causes quickly. thus saving diagnostic time.Only some advanced diagnostic tools provide this function currently, but A30 Pro has this function at the low cost.

3. Auto VIN SCAN for Quick Diagnosis

XTOOL A30 PRO is a Smart Diagnosis Tool ,after connection, turn the ignition key on and the system enters auto-detect mode.With only one click,you can scan your vehicle's information, including VIN (Vehicle Identification Number), Vehicle Model, Version, Basic Type, etc.

4. 15+ Useful Reset Functions

Oil Reset: Reset service intervals after oil change and turn off the oil light.

EPB Reset: Reset brake pads after replacement of brake system.

BMS Reset: Register the new battery to the ECU after replacement.

Throttle Relearn: Enables you to make initial settings to throttle actuators to adjust the amount of air intake.

SAS Adjustment: Perform calibration of the steering angle sensor

Injector Coding: Coding injectors after replacement.

ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

Gearbox Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

Air Suspension: Calibrate the suspension height.

Gear Learning: Crankshaft position sensor learns crankshaft tooth machining to lerance and saves to the tablet to more accurately diagnose engine misfires.

TPMS Reset: When the tire pressure is insufficient, it is necessary to reset the tire pressure after replacing the tire or sensor.

Headlight: Initialize the adaptive headlight system.

Key Programming: Access to the immobilizer system inside the vehicles and supports multiple functions like key programming, add key fobs for specific vehicles.

5. WIFI One-Click Update Online + 3 Years Free Software Update

Only need to connect to WIFI network, you can update the software online. Provides you with more software performance and increases the coverage of the updated vehicle.

Wireless Connection

XTOOL A30 PRO is a wireless diagnostic tool that communicates with the vehicle via Bluetooth connection. Can expanded the work range up to 33 feet(10 m)，provides you with higher mobility .
- The cable attacted is for connecting the vehicle and the wireless VCI only ,to save you every time plug and unplug the VCI.

- The OBD2 port on the bottom of A30 PRO can be used for charging, to solve the problem for the machine to run out of power during the journey.
- Connection steps :1.First open the A30 PRO host. 2.Connect the VCI,via Bluetooth. 3.Connect then VCI to the car with the cable.

Smart Touch Screen

Portable Handheld Scanner with Smart Touch Screen,humanized design makes operation more convenient.Simple and intuitive navigation makes operating simple and fast.

6. Complete OBD2 Functions

> Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

> Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

> Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

> I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

> Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

> View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

> O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

> On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

> Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

> Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

XTOOL A30 Pro Extensive Vehicle Coverage:

XTOOL A30 PRO can diagnose more than 70+ US ,Domestic, European,Autrialian and Asian makes and models from 1996 and later.

America: For Buick, For Cadillac, For Chevrolet, For Chrysler, For Dodge, For Ford(USA), For GM, For GMC, For Hummer, For Lincoln, For Saturn, For Pontiac.

Europe: For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Benz-Transporter, For BMW, For Bugatti, For Citroen, For Dacia, For Ferrari, For Fiat, For Ford (EU), For Jaguar, For Lamborghini, For Lancia, For Land Rover, For Maybach, For Mercedes, For MINI, For Opel, For Peugeot, For Renault, For Rolls-Royce, For SAAB, For Seat, For Skoda, For Smart, For UAZ, For Vauxhall, For VAZ, For Volvo, For VW, For VW-CV.

Asia: For Acura, For Daewoo, For Daihatsu, For Honda, For Hyundai, For HyundaiCV, For Infiniti, For Isuzu, For Kia, For Lexus, For Mazda, For Mitsubishi, For Nissan, For Perodua, For Proton, For Renault Samsung, For Scion, For Ssangyong, For Suzuki.

Australia: For Ford (AU), For Holden.

China (Domestic): For BYD, For Chery, For Geely, For Genow, For Great Wall, For Lifan, For SHVW.

NOTE: Supported Car Brands are NOT Compatible with All Models.

Product Details: