VXDAS News
VXDAS News
NEXZDAS Full- System Diagnostic Tool For Single Car Manufacturer
NEXZDAS Full- System Diagnostic Tool For Single Car Manufacturer
NEXZDAS ND201 Full- System Diagnostic Tool is a cost-effective professional scan tool for enthusiasts, small garages, technicians with full access to full system scan Engine system, ABS system, SRS system, Transmission system etc.
NEXZDAS ND201 Specifications
Operating System: Android 5.0 and above
Communications: Bluetooth 4.2 / wired connection
Operating Voltage: 9～30V DC
Operating Temperature: -20～70°C
Storage Temperature: -40～85°C
Working Humidity: 5%～95%
Average Power Consumption: <2W
NEXZDAS ND201 Highlights
Full Coverage of OBD2 Functions
1. Read and Clear Codes: Read and clear engine codes. Confirmed, Pending and Permanent for all makes.
2. Freeze Frame: Freeze Frame data is a snapshot of the vehicle when the Freeze Frame code was stored.
3. Smog Check : Check if the vehicle is ready for a smog or emissions test.
4. Mode 6: Advanced test results (like misfire counts) for on-board diagnostic system monitors.
5. O2 Sensor: Check the vehicle O2 sensor values.
6. Battery Test: Show battery voltage and comment battery status.
NEXZDAS ND201 Comprehensive Functions
1. Basic functions : read codes, clear codes, action test, data flow .
(1) Read codes, clear codes: for the whole electronic systems. For each DTC, a report can be generated in which the code definition and possible causes are listed clearly , greatly increase the diagnostic efficiency.
(2) Action Test: Carrying out tests on some components of the vehicle,such as test Headlights, rear mirrors, seats,injector,volume of the sound, water temperature meter etc .
2. ECU Coding function .
Note :This function only suitable for Audi,for Skoda,for Seat,for Bentley,for Lamborghini,for Bugatti
Modify some parameters of the vehicle ,including install new ECU , new Sensor , new Components...
3. Resetting Function
(1) ABS Bleeding , Anti-lock Braking System Bleeding
Reads and clears codes and turns off ABS warning indicator. Performs bi-directional control tests.
(2) EPB Reset , Electrical Park Brake Reset
Lets you perform bi-directional tests on EPB systems and can deactivate and re-activate brake control system.
(3) DPF , Diesel Particulate Filter
It can reset Diesel Particulate Filters and the DPF light after the filter been replaced.
(4) Oil Reset
Allows you to set service intervals ,inspection mileage and resets service lights in a click of a button on supported vehicles .
(5) Injector Adjust
Cylinder can better identify the cylinder nozzle, accurately control fuel injection after confirming or re-coding.
(6) Battery Change
It is required to associate the new battery with the vehicle ECU to complete the job and start the engine.
(7) TPMS Reset ,Tire Pressure Monitoring Sytem Reset
Tire Pressure Monitoring Sytem Reset can monitor the air pressure inside the pneumatic tires and reset it in real-time.
NOTE: These special function not for all car models, if you are confused, you can send your car brand, model and release year to me, I will check for you.
NEXZDAS ND201 Product Feature:
1. Connection Method: Bluetooth & wired stable connection.
2. Supported System: Android system.
3. Vehicle Coverage: available for both passenger cars and heavy-duty vehicles.
4. System Coverage: complete system coverage (Engine, ABS, SRS, Transmission, etc.)
5. Basic Function: read/clear codes, enhanced live data for all vehicle systems.
6. Enhanced Function: ECU resetting, coding.
7. Diagnostic Report: Clearly displays the malfunctions in details, including the vehicle information, vehicle status,etc.
8. Assistant Module Added: provides the product related help, including DTC query, one-key update, remote assistance, dictionary, etc.
9. Product Appearance: portable VCI design provides you with convenient diagnosis.
10. User Interface: clear and intuitive interface with easy operation.
NEXZDAS ND201 Support Vehicle List:
Package List:
1 pc x NEXZDAS ND201 Diagnostic Tool
1 pc x User's Guide
1 pc x USB Cable
NEXZDAS ND201 Full- System Diagnostic Tool is a cost-effective professional scan tool for enthusiasts, small garages, technicians with full access to full system scan Engine system, ABS system, SRS system, Transmission system etc.
NEXZDAS ND201 Specifications
Operating System: Android 5.0 and above
Communications: Bluetooth 4.2 / wired connection
Operating Voltage: 9～30V DC
Operating Temperature: -20～70°C
Storage Temperature: -40～85°C
Working Humidity: 5%～95%
Average Power Consumption: <2W
NEXZDAS ND201 Highlights
Full Coverage of OBD2 Functions
1. Read and Clear Codes: Read and clear engine codes. Confirmed, Pending and Permanent for all makes.
2. Freeze Frame: Freeze Frame data is a snapshot of the vehicle when the Freeze Frame code was stored.
3. Smog Check : Check if the vehicle is ready for a smog or emissions test.
4. Mode 6: Advanced test results (like misfire counts) for on-board diagnostic system monitors.
5. O2 Sensor: Check the vehicle O2 sensor values.
6. Battery Test: Show battery voltage and comment battery status.
NEXZDAS ND201 Comprehensive Functions
1. Basic functions : read codes, clear codes, action test, data flow .
(1) Read codes, clear codes: for the whole electronic systems. For each DTC, a report can be generated in which the code definition and possible causes are listed clearly , greatly increase the diagnostic efficiency.
(2) Action Test: Carrying out tests on some components of the vehicle,such as test Headlights, rear mirrors, seats,injector,volume of the sound, water temperature meter etc .
2. ECU Coding function .
Note :This function only suitable for Audi,for Skoda,for Seat,for Bentley,for Lamborghini,for Bugatti
Modify some parameters of the vehicle ,including install new ECU , new Sensor , new Components...
3. Resetting Function
(1) ABS Bleeding , Anti-lock Braking System Bleeding
Reads and clears codes and turns off ABS warning indicator. Performs bi-directional control tests.
(2) EPB Reset , Electrical Park Brake Reset
Lets you perform bi-directional tests on EPB systems and can deactivate and re-activate brake control system.
(3) DPF , Diesel Particulate Filter
It can reset Diesel Particulate Filters and the DPF light after the filter been replaced.
(4) Oil Reset
Allows you to set service intervals ,inspection mileage and resets service lights in a click of a button on supported vehicles .
(5) Injector Adjust
Cylinder can better identify the cylinder nozzle, accurately control fuel injection after confirming or re-coding.
(6) Battery Change
It is required to associate the new battery with the vehicle ECU to complete the job and start the engine.
(7) TPMS Reset ,Tire Pressure Monitoring Sytem Reset
Tire Pressure Monitoring Sytem Reset can monitor the air pressure inside the pneumatic tires and reset it in real-time.
NOTE: These special function not for all car models, if you are confused, you can send your car brand, model and release year to me, I will check for you.
NEXZDAS ND201 Product Feature:
1. Connection Method: Bluetooth & wired stable connection.
2. Supported System: Android system.
3. Vehicle Coverage: available for both passenger cars and heavy-duty vehicles.
4. System Coverage: complete system coverage (Engine, ABS, SRS, Transmission, etc.)
5. Basic Function: read/clear codes, enhanced live data for all vehicle systems.
6. Enhanced Function: ECU resetting, coding.
7. Diagnostic Report: Clearly displays the malfunctions in details, including the vehicle information, vehicle status,etc.
8. Assistant Module Added: provides the product related help, including DTC query, one-key update, remote assistance, dictionary, etc.
9. Product Appearance: portable VCI design provides you with convenient diagnosis.
10. User Interface: clear and intuitive interface with easy operation.
NEXZDAS ND201 Support Vehicle List:
Package List:
1 pc x NEXZDAS ND201 Diagnostic Tool
1 pc x User's Guide
1 pc x USB Cable
