2023 Super ICOM PRO N3+ For BM-W Full Configuration Plastic Box Supports DoIP J2534 Compatible with Original For BM-W ICOM Software 2023 Super ICOM PRO N3+ For BM-W Full Configuration Plastic Box Supports DoIP J2534 Compatible with Original For BM-W ICOM Software
Super ICOM PRO N3+ BM-W Diagnostic Tool Supports DoIP J2534
The Super ICOM Pro N3+ is developed on the basis of BM-W's special inspection devices ICOM A1, A2, A3, and N3. On the basis of inheriting the advantages of these products, N3+ optimizes and upgrades them. It is 100% compatible with the original BM-W special inspection software without any software changes, and J2534 and DOIP are added on the basis of the special inspection.The N3+ is the same as the N3, with one code for one machine, and the wireless is bonded with the machine code, which is convenient for customer service and product tracking.
To use N3+ as Benz DoIP device, you need to have Benz license activated.
Super ICOM PRO N3+ Highlights:
- Supports WiFi and USB connection.
- Firmware update online
- Replace ICOM Next and ENET cable. Fully compatible BM-W ICOM ISTA-D, ISTA-P, INPA, WinKFP, E-sys etc engineering software
- With OBDII to 20-PIN cable for old BM-W and 10-PIN cable for BM-W motorcycle
- Compatible with DoIP protocol
- Can be used as J2534 Passthru device for ODIS HDS TIS GDS2 SDD etc
About Software:
This hard drive is not a brand new SSD hard drive
Super ICOM PRO N3+ Features:
Dual Heat Dissipation Design:
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BM-W special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.
USB and WiFi connection:
Wired USB mode: Wired adopts standard USB 3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)
Firmware Update Online:
The Super ICOM Pro N3+ adopts the original ICOM solution. The firmware upgrade is synchronized with the original factory and the steps are the same. If there is an update to the firmware in the future, users can download it from the official website of the original factory and then upgrade. The current firmware version goes to V149.
How To Update Super ICOM PRO N3+ Hardware?
Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.
One-key Switch Button
Mobile App
Supports BM-W APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool and other mobile apps.
Super ICOM Pro N3 Plus Functions:
N3+=BM-W ICOM+J2534+DOIP+WIFI
3. DOIP device
4. WIFI device
What is the difference between Supoer ICOM Pro N3+ and ICOM NEXT?
Packing List:
Super ICOM PRO N3+ BM-W Diagnostic Tool Supports DoIP J2534
The Super ICOM Pro N3+ is developed on the basis of BM-W's special inspection devices ICOM A1, A2, A3, and N3. On the basis of inheriting the advantages of these products, N3+ optimizes and upgrades them. It is 100% compatible with the original BM-W special inspection software without any software changes, and J2534 and DOIP are added on the basis of the special inspection.The N3+ is the same as the N3, with one code for one machine, and the wireless is bonded with the machine code, which is convenient for customer service and product tracking.
To use N3+ as Benz DoIP device, you need to have Benz license activated.
Super ICOM PRO N3+ Highlights:
- Supports WiFi and USB connection.
- Firmware update online
- Replace ICOM Next and ENET cable. Fully compatible BM-W ICOM ISTA-D, ISTA-P, INPA, WinKFP, E-sys etc engineering software
- With OBDII to 20-PIN cable for old BM-W and 10-PIN cable for BM-W motorcycle
- Compatible with DoIP protocol
- Can be used as J2534 Passthru device for ODIS HDS TIS GDS2 SDD etc
About Software:
This hard drive is not a brand new SSD hard drive
Super ICOM PRO N3+ Features:
Dual Heat Dissipation Design:
The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the BM-W special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.
USB and WiFi connection:
Wired USB mode: Wired adopts standard USB 3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)
Firmware Update Online:
The Super ICOM Pro N3+ adopts the original ICOM solution. The firmware upgrade is synchronized with the original factory and the steps are the same. If there is an update to the firmware in the future, users can download it from the official website of the original factory and then upgrade. The current firmware version goes to V149.
How To Update Super ICOM PRO N3+ Hardware?
Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.
One-key Switch Button
Mobile App
Supports BM-W APP software, provides mobile phone English version of Bimmercode (coding hidden functions activation) Bimmerlink (diagnostics codes clearing) and other mobile phone software, supports MHD .Bimmergeeks .. XHP Flashtool and other mobile apps.
Super ICOM Pro N3 Plus Functions:
N3+=BM-W ICOM+J2534+DOIP+WIFI
3. DOIP device
4. WIFI device
What is the difference between Supoer ICOM Pro N3+ and ICOM NEXT?
Packing List:
