PSA IMMO Tool for Peugeot and Citroen Pin Code Calculator From 2001- 2018 PSA IMMO Tool for Peugeot and Citroen Pin Code Calculator From 2001- 2018

RN02
0.3kg
Auto Key Programmer
$99.00 $59.99 39%
-
+

PSA IMMO Tool is the newest PIN code calculator and IMMO emulator for Peugeot and Citroen from 2001 to 2018.


With this tool, you will be able to extract the pin code from PSA engines in Peugeot and Citroen cars from 2001 to today!

The device has two main functions :one is pin code calculation via obd, it intercepts the signal from bsi to ecu, pin code from obd needs working key. Another function is the emulator programming this allows you to enter the pincode into the emu to run the car without key

 

The calculator has two modes, these are explained below.


Mode-1 Calculator: Connect the supplied OBD lead to car and select "Calculator" Then cycle the ignition 8 times. Each time to cycle the ignition the counter will increase. On the 8th turn the calculator will start working. Wait about 5 minutes and the security pin will be displayed on the screen.

Mode-2 Emulator: The Emulator function will just emulate a working key once the pin has been calculated. This can be useful for diagnosing problems with the security system.

Not all cars can be done via the diagnostic port, some cars require the calculator to be connected to the CAN H and L cables under the bonnet. Basically if a CAN H and L connection is available in the diagnostic port then you will be able to use the calculator through the OBDII port, if not then it requires a direct connection.

The calculator will work on cars from 2001 to the present day as long as its the ORIGINAL PSA engine type found in Peugeot and Citroen

 

Package includes:

1PC x Handholder
1PC x OBDII Lead
1PC x CAN connection cables

PSA IMMO Tool is the newest PIN code calculator and IMMO emulator for Peugeot and Citroen from 2001 to 2018.


With this tool, you will be able to extract the pin code from PSA engines in Peugeot and Citroen cars from 2001 to today!

The device has two main functions :one is pin code calculation via obd, it intercepts the signal from bsi to ecu, pin code from obd needs working key. Another function is the emulator programming this allows you to enter the pincode into the emu to run the car without key

 

The calculator has two modes, these are explained below.


Mode-1 Calculator: Connect the supplied OBD lead to car and select "Calculator" Then cycle the ignition 8 times. Each time to cycle the ignition the counter will increase. On the 8th turn the calculator will start working. Wait about 5 minutes and the security pin will be displayed on the screen.

Mode-2 Emulator: The Emulator function will just emulate a working key once the pin has been calculated. This can be useful for diagnosing problems with the security system.

Not all cars can be done via the diagnostic port, some cars require the calculator to be connected to the CAN H and L cables under the bonnet. Basically if a CAN H and L connection is available in the diagnostic port then you will be able to use the calculator through the OBDII port, if not then it requires a direct connection.

The calculator will work on cars from 2001 to the present day as long as its the ORIGINAL PSA engine type found in Peugeot and Citroen

 

Package includes:

1PC x Handholder
1PC x OBDII Lead
1PC x CAN connection cables

Health Care & Protection

Take it, Protect Yourself

Health Care & Protection

Take it, Protect Yourself

Recently Viewed Products Recently Viewed Products