XTool IK618 Automotive All System Diagnostic Scanner Car Diagnostic Tool Auto Key Programmer
XTool IK618 Automotive All System Diagnostic Scanner Car Diagnostic Tool Auto Key Programmer
XTool IK618 Automotive All System Diagnostic Scanner is a professional auto key programmer with diagnostic functions. XTool IK618 can scan all available systems to perform diagnostics, support complete OBD2 test, perform pro-level key programming and IMMO functions, and support more than 30 special reset services.
XTool IK618 Professional Immo & Key Programming:
XTool IK618 is a professional car key programming tool that can perform pro-level key programming and IMMO functions as below:
-- Read pin
-- Add transponder/smart key/remote learning, disable lost keys, make Key Learning for BM-W cars 4/3/2/1
-- Key programming for V-W, for A-udi, for Skoda, for seat, for Bentley, for 4th, 5th, mqb IMMO
-- Make key dealer key for Toyota & for Lexus (with KS-1 key programmer)
-- Make reseller key for Mitsubishi (with KS-2 key programmer)
-- Immo ECU reset/encode
-- IMMO data backup/restore
-- Read & write key chips
- - Read & write Mercedes infrared keys
-- Read and write EEPROM
-- Detect remote frequency
OE Level All Diagnostic Systems + Bidirectional Control:
The IK618 Bi-Directional scan tool comes with O-level and all systems diagnostic capabilities that you can find only in dealer-tool formerly. It can scan all available systems to perform diagnostics including:
Traction Codes: Including manufacturer-specific codes, pending codes, and permanent codes
Clear codes: Clear codes, reset monitors and turn off warning lights
Live Data: Live data stream from Various sensors including misfire, engine rpm, transmission fluid temperature and etc.
Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
ECU Information: Check ECU Version and etc.
Active Tests: Evap tests, test injectors, cooling fan, a/c clutch, windows, doors, sunroof, abs motor pump, solenoids, relays and etc.
XTool IK618 with 30+ Reset Services
Oil Reset: Perform reset for a new calculation of engine oil life system once changed the oil.
EPB Reset: Maintain the electronic braking system safely and effectively.
SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
DPF: Clear the blockage via the continuous burning of the particulate matter captured in the filter.
Battery Replacement: Register the newly replaced car battery into the computer.
Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.
ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.
EEPROM Adapter: Read EEPROM data when OBD method is not available.
XTool IK618 Supports 14 Types of Language
XTool IK618 supports 14 languages: English, Spanish, German, French, Portuguese, Italian, Finnish, Arabic, Japanese, Thai, Korean, Polish, Russian, Chinese
XTool IK618 Compatible with KC-501, KS-1, Can FD Key Programmers
XTool IK618 comes standard with KC-100 key programmer. However, you can choose to get KC-501, KS-1, KS-2 key programmers to extend your capabilities to the next level.
It also can work with FD and M281 can adapter.
XTool IK618 Packing List:
P710 Tablet x1,
KC100 Programmer x1,
EEPROM Adapter x1,
Power adapter for Tablet x1,
US Standard Charger x1,
EU Standard Charger x1,
VGA to DB15 Male Main Cable x1,
OBD2-16 Connector x1,
USB3.0 Cable x1,
Mini USB to USB-C Cable x1
XTool IK618 Automotive All System Diagnostic Scanner is a professional auto key programmer with diagnostic functions. XTool IK618 can scan all available systems to perform diagnostics, support complete OBD2 test, perform pro-level key programming and IMMO functions, and support more than 30 special reset services.
XTool IK618 Professional Immo & Key Programming:
XTool IK618 is a professional car key programming tool that can perform pro-level key programming and IMMO functions as below:
-- Read pin
-- Add transponder/smart key/remote learning, disable lost keys, make Key Learning for BM-W cars 4/3/2/1
-- Key programming for V-W, for A-udi, for Skoda, for seat, for Bentley, for 4th, 5th, mqb IMMO
-- Make key dealer key for Toyota & for Lexus (with KS-1 key programmer)
-- Make reseller key for Mitsubishi (with KS-2 key programmer)
-- Immo ECU reset/encode
-- IMMO data backup/restore
-- Read & write key chips
- - Read & write Mercedes infrared keys
-- Read and write EEPROM
-- Detect remote frequency
OE Level All Diagnostic Systems + Bidirectional Control:
The IK618 Bi-Directional scan tool comes with O-level and all systems diagnostic capabilities that you can find only in dealer-tool formerly. It can scan all available systems to perform diagnostics including:
Traction Codes: Including manufacturer-specific codes, pending codes, and permanent codes
Clear codes: Clear codes, reset monitors and turn off warning lights
Live Data: Live data stream from Various sensors including misfire, engine rpm, transmission fluid temperature and etc.
Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
ECU Information: Check ECU Version and etc.
Active Tests: Evap tests, test injectors, cooling fan, a/c clutch, windows, doors, sunroof, abs motor pump, solenoids, relays and etc.
XTool IK618 with 30+ Reset Services
Oil Reset: Perform reset for a new calculation of engine oil life system once changed the oil.
EPB Reset: Maintain the electronic braking system safely and effectively.
SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
DPF: Clear the blockage via the continuous burning of the particulate matter captured in the filter.
Battery Replacement: Register the newly replaced car battery into the computer.
Injector Coding: Code the new injectors after replacement for accurate fuel injecting control.
ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.
EEPROM Adapter: Read EEPROM data when OBD method is not available.
XTool IK618 Supports 14 Types of Language
XTool IK618 supports 14 languages: English, Spanish, German, French, Portuguese, Italian, Finnish, Arabic, Japanese, Thai, Korean, Polish, Russian, Chinese
XTool IK618 Compatible with KC-501, KS-1, Can FD Key Programmers
XTool IK618 comes standard with KC-100 key programmer. However, you can choose to get KC-501, KS-1, KS-2 key programmers to extend your capabilities to the next level.
It also can work with FD and M281 can adapter.
XTool IK618 Packing List:
P710 Tablet x1,
KC100 Programmer x1,
EEPROM Adapter x1,
Power adapter for Tablet x1,
US Standard Charger x1,
EU Standard Charger x1,
VGA to DB15 Male Main Cable x1,
OBD2-16 Connector x1,
USB3.0 Cable x1,
Mini USB to USB-C Cable x1
